Recent content by mikebpbx

lol - I'm dumb but not that dumb. My wife's boyfriend would never let me hear the end of it. I took it to the store and measured, but the fumoto was too tall to screw in with the bracket in place. I could take the whole damn bracket off, put it in, and then the bracket would fit properly. The...

I did what @lynnmor suggested and took a piece of cardboard and made a chute to drain it, no problem. I got a Fumoto valve to put in (the one with the hose barb) but it won't fit, so boo for that. I can do this every 200 hours I suppose...

Y'all: I am attempting to change my oil and the dang oil drain plug is directly above a welded plate for the loader bracket. Does anyone have a similar setup and how do you change the oil? Just open it and make a mess or what? I'm not removing the loader mounting bracket, that's for sure. This...

I cleaned the screen and washed out the fins (let it dry before running again, so the dry stuff didn't just stick on) I'm not sure about the inside but the outside is OK (I have a B2100 too and was aware of this). The fan spins, seems to be in good shape and has decent tension. I suppose I'll...

I have a B2400 that gets almost-overheated when I mow for about 20 minutes. If I just stop and sit (no moving but PTO still engaged) it will quickly cool off. Any ideas what to check? If I use the loader and drive around for 20 minutes, no issues. If I engage the blades and let the tractor...

New news, I suppose - I was out mowing today after tightening the alternator belt a little (there was a lot of deflection) As I mowed it was creeping up (temp wise) and then it died. Now, whenever I engage the mid-PTO it tries to turn the belt/blades and dies. Not like an electronic problem...

248 or so - very low hours. I've put about 10 on it in 3 months or so

I have a B2400 with a 60" deck It overheats when I'm mowing with it. I mowed this morning and the grass was not really too tall, in low gear, and it gets up to the top of the white line (does not go into the read, bu is all the way up). It does not overheat if it's just sitting (I ran it the...

Maybe a dumb question, but could I go down to 1.5 instead, as long as I keep the 1" pin size, or would it be too underpowered?

I've got an LA 352 on a B2400 and the hydraulic cylinders are rusted and need replaced (can't just do seals, unfortunately) The bore and stroke seem to be odd sizes. Does anyone know what aftermarket cylinders I can put on this thing, and if I need these *exact* sizes? Is it better to go...

I have a B2400 with La352 - The hydraulic cylinders are leaking and the rods are pitting. Are these repairable or do I need new ones? If I do need new ones, can I get any that are not Kubota branded (and priced) - I have a tractor supply and agri supply and a few other tractor places close. I...

Hi all, I have a B2100 with an RC60-24B and just picked up an RC72-27B for a price I could not refuse (30 minutes away and free). It's a little bigger than the RC60 (not just a foot wider but a little deeper). Is there any hope on getting it to fit? I think I can shorten the front arm/hanger...

Do you still have this? Please send me a message if you do - am looking for one.

Anybody know where to get one? I already got a scammer sending me pictures from an auction from 2022 on the web. Does anyone who is not a scammer have one of these or know of one of these for sale?

Fair warning - I got a guy that says he's offering a deck for $650 shipped but sends pictures from an auction site - here's what he sent - pretty sure this is a scam: Here’s my wife Zelle terrancehollie2@gmail.com Laterrance hollie Once payment is confirmed I'll ship today and send you...