midironman's latest activity
-
Mmidironman replied to the thread L3302 REAR REMOTE.Thanks Dan. That is a good visual and looks super easy!
-
MSo if you plan to buy a valve, you have an open center hydraulic system with power beyond (usually a plug that you might have to...
-
MYou basically have two choices. One OEM remote valve @$1200 or an aftetmarket/DIY valve for a half to a third if that. On a L02 DIY is...
-
Mmidironman replied to the thread L3302 REAR REMOTE.Thanks for all the replies. Obviously came to the right place! I think I need to just pony up and spend the money to do it right. Sounds...
-
MWhy use the third function valve? Why not come off the FEL valve power beyond port to hook up the rear remotes? You might have to make...
-
MCan you precisely feather your grapple close and open with your 3rd function? - If you can (since you need to do that for a toplink)...
-
MYes you can just use the existing valve and longer hoses to control the rear hydraulic cylinder(s). I guess I would just use long hoses...
-
MI can disconnect my grapple and use the same hose to connect to something in the rear. I don't have it where the hoses are connected to...
-
MRight idea but wrong plumbing. You connect it to the power beyond loop at your 3rd function and it works just like factory remotes...
-
MI teed the outputs of the third function valve running a pair to the front for the grapple and a pair to the rear. I use that set to...
-
MI did the exact same thing. Works great on my L3301. I found the correct fitting off the top of the third function block and teed the...
-
M@midironman While you probably already know this I just want to be sure you know to use hydraulic fittings and not pipe fittings if you...
-
MI think a rear valve is probably cheaper and certainly far more convenient. Dan
-
MI added a 2 spool valve too and that controls my top and tilt. This lets me change the angle left and right of a blade or the rake.
-
Mmidironman replied to the thread L3302 REAR REMOTE.Ok, got it. That sounds like a good idea. I could just pull off the existing hose clamps on the loader and secure the hoses using...
