Recent content by lostboy

  1. L

    LX2610 or LX3310

    For what it is worth, I believe the LX3310 is fuel injected, the LX2610 is not. Does anybody know if the LX3310 will burn more diesel for a comparable task? Neil gave the impression diesel usage on the LX3310 would not be much more.
  2. L

    LX2610 3pt doesn't go low enough

    It doesn't seem like it lost any height. I wouldn't hesitate to try it. It is very easy to change if you don't like it. Good luck.
  3. L

    LX2610 3pt doesn't go low enough

    Yes. That is what I moved. I have not had any issues since I moved to the holes closer to the tractor. People say it reduces the 3 pt lift capacity some.
  4. L

    LX2610 3pt doesn't go low enough

    Well I finally moved the lift arms to the holes closer to the axle. It lowered the three point about 3.5 inches. So now it is about 8 inches above the ground which works great with my woodland Mills stump grinder. Thanks everybody.
  5. L

    LX2610 and mid mount mower

    I have a non cab lx2610 with 60" MMM with the turf tires. The step is on the tractor.
  6. L

    Front tire pressure

    Check your front end loader manual to see what it recommends for tire pressure. It usually is the same as the tractor manual.
  7. L

    Can I use a Box Blade with Turf Tires for my project?

    Turfs will be fine, just Air them up as recommended. This video isn't about the turf tires, but I think you will get the idea.
  8. L

    Linkage Arm for MMM

    Have you tried disconnect your front bar on the mower then connecting the side. Then you should be able to put in your front bar.
  9. L

    Plagued by inventory

    @barndoor What did you end up doing?
  10. L

    Sound coming from 60" MMM deck on LX2610

    Thanks for the information. I will do that next time.
  11. L

    Plagued by inventory

    No push back. I called the salesman and was completely up front with him. Told him a used tractor came up on market place and asked him when mine would be delivered. He said he couldn't give a date until it shipped and he wasn't sure when it would. He said to just let him know if I didn't...
  12. L

    Equine offer pricing experience

    I had a similar experience as River19 with an equine quote. Configure the machine on Kubota's website then take off 20%. The deal I worked with added the following fee's: tractor pdi $250.00 loader pdi $255.00 freight $675.00 3rd function install $500.00 I never figured out if the tractor was...
  13. L

    Plagued by inventory

    I had ordered an LX2610 with FEL 3rd function in early February with it coming in the end of March. Had it all setup with the equine discount. March came and went with no tractor and it kept getting pushed. Then on April 10th a used 35 hour LX2610 with FEL 3rd fucntion, self-leveling...
  14. L

    Loader dumps while raising

    Well I figured out where the self leveling valves were and which one I thought was for the curl cylinders. Which happened to have a screw out further. So I screwed it in a couple of times. It seemed to work better and not dump the rock. This is just something I tried and I do not recommend...
  15. L

    Loader dumps while raising

    Thanks NJtool. I didn't realize it also included a hydraulic portion. It is called "Mechanical self-leveling" after all. In looking at the parts diagram for the LA535 loader on messick's I see there is a "port relief valve" and a "relief valve". So I am thinking they might need to be...