Recent content by LBZ

Yes, R14's

So without actually mowing I ran it at 540 rpm pto speed with top link fully extended and shifted completely to the right, roller on the floor with no chatter. Hopefully I'll have a better report as soon as it dries up a little. Really can't complain as we have been in a moderate drought.

So, I decided to go with a flail. With the roller set to allow the highest cut and using the hydraulic top link I can get the hammer blades from 7 inches above the shop floor to 2.5 to 3 inches above the shop floor while keeping the roller on the floor. I believe I'll be able to keep it at...

My 2601 is a 2020 but I am only running 8psi in the rears with no tire ballast and have used a 700lb ballast box.

There was that one time while using blue dye that I made some blue bunny's. Seriously though I did not find blue dye against a green field very helpful. Why wouldn't a dye be like a florescent pink or just white in color?

One thing I suggest, is to get a “grill guard” BEFORE you punch a hole through your grill/radiator. :eek: Plus 1000 ^^^^^^^ My grill would not have lasted very long without the grill guard.

https://stingerattachments.com/buy/ccg-56-compact-clam-grapple/ Another you may want to look at. Ive only had one for a couple weeks but so far I'm impressed. Works pretty good for ripping out our pesky multiflora rose and can pick up from the side or the top. double lid handles different...

Mowed for the first time this spring with the 2601. The neighbor has had cows next to me since December so as spring comes I get some fertilizer and a early start to mowing season.

83.22% of all statistics are just made up on the spot.😜

Got a grapple for the 6060 yesterday. Probably in for a learning curve.

I bought sticks of DOM from Mcmaster carr for this exact reason.

Good customer service is something to keep in mind as well when shopping dealers.

Well, spring is here. Saw my first ones yesterday.

Rat-rod tractor!

I may be wrong here but the way I see it is that the flail would be much closer to the tractor there by minimizing height differences. On the other hand If the rears fall in to a dip the mower would obviously cut too close. I also have some clover I'd like to cut over the top of but I have the...