Recent content by Kodiak_of_MN

Mission complete. I ended up using this plug: https://www.amazon.com/dp/B00A42OASW?ref=ppx_yo2ov_dt_b_fed_asin_title The hole in the fender had to be increased to 1 1/8" and moved slightly outboard to clear the hump in the middle. Also had to cut off the factory connector and reterminate...

I had similar symptoms on my BX2350. First indication was no "click" when the key is turned to the ON position. Turns out that at least on this machine the click is from the fuel shut off solenoid. I manually worked the solenoid shaft in and out a few times to get it unstuck. It's been fine...

First off, thanks to everyone that contributed their advice. Here's what I found and how I proceeded. I did reverify the plug inner wall was properly grounded and that the incoming power wire at the back of the socket was hot with the key ON. Turns out the factory socket is not threaded...

Hi - My 12v outlet stopped working. Confirmed with a meter that there is no voltage between the "button" on the bottom of the plug and the wall of the plug. Verified the fuse is good. All checks were done with the key ON. Next step is to pull the outlet itself out to check the connections...