Recent content by kdparker

Good writeup. Thanks for posting.

I disagree with your dealership. I have a B2601 with 60 in belly mower and I live in the hills of east TN. I mow very steep hills in M with no issues. I have hills on my property that have a 90 ft rise from bottom to top. I have not tried in in high due to M seems plenty fast for me. I...

I have been following this discussion and am interested in the fuel strainer. I have not been able to find the part number above , TI1593 in the Kubota parts online system. Has anyone found these in the US? Thanks,

I was in the same position as you. I have a large cab tractor and I purchased a B2601 with FEL & MMM about one year ago. It has been the best decision. I use it almost every day for some chore.

I have used the Northern tank you listed for the last two years. I built a platform to hold it that works very well for me. I use it to water trees and other plants. The nine-inch "mounting" measurement is misleading. The actual tank is about 15-inches wide. My property has some VERY steep...

Lessons Learned on 50 hour maintenance on Kubota RTV520 I looked on internet forums and YouTube for information/hints on performing 50 hour maintenance on my Kubota RTV520. I did not find much information, but I did get two replies on the Orange Tractor Talks forum. So, I decided to record...

Thanks for the information

I am getting close to having to do the 50 hour service on my RTV520. I am asking if anyone has already performed the 50 hour service on the RTV520 and has any hints and lessons learned to share? Thanks in advance, Keith

I attached a PDF of wiring diagram for the RTV 500. Should be very close to same as RTV 520.

I have similar small chunks removed on 2 of the tires. However, I mow about 10 acres and some of the land was cleared two years ago with a forestry mulcher and has some rough spots.

I purchased one of these about a year ago and I have been pleased with the improvement. It does a good job reducing the mess.

mrwrenchman, thanks for the pics and information, I would be interested in more info and pics of the toolbox installation. Thanks,

Troverman, I really appreciated your review and comments about your L4060 HSTC. I am making my final decision to purchase the same tractor and have one concern regarding the stability (tippy) of the tractor on slopes. I read where you set the tire width out to max and added a two inch spacer...

Thanks for the information and contact.