Recent content by kanucmee

Well, I got the top link in today and installed it onto the QH15. Also have the pins and bushings all put into place, and was able to hook up the PTO shaft and got it all working. Appreciate all the help and guidance in getting it all hooked up and working properly!

I agree with all points above. I guess that’s why they were including these QH15s with the purchase of the tractors. I probably wouldn’t have gotten one, had it not been included when I purchased mine. Also, took some updated photos of my new setup, after picking up the bushings. Still waiting...

I was able to pick up the required bushing yesterday from my local dealer. They were "Category 1 to Category 2" and another "Category 2 to Category 3" bushings, and I was able to get them to slide over each other, and looks exactly the same as in post #2's second picture (the picture with the...

Excellent, thanks for all the replies. I'll stop by my local dealer and see what they have. Stopped by TCS yesterday because it was the only place open at the time, but I would definitely prefer to support my local dealer, as they have always been good at taking care of me whenever I needed...

Thanks for the reply! I believe I have the floating top link for the finish mower, and just took a picture of it. Your first picture, of the bushing, that's what I'm needing but cannot find a part number or anything. I even went to Tractor Supply and they only had the "category 1 to category...

I have been using a LandPride 1860 Rotary Cutter on the back of my tractor for quite some time, so haven't really had to deal with new attachments. However, I have recently just purchased a Finishing Mower and it did not have any pins for attaching to my QH15, but this is where I'm struggling...

For the most part, I agree. However, having 10 acres to brush hog, it’ll make it easier to keep a steady speed. If I were doing bucket work or small areas, then I wouldn’t use it, but with brush hogging, there will be times where you don’t want to go full speed and trying to manually keep your...

So, just an update. Picked up the correct cruise control kit for the L3902 a week or two ago, but it’s been way too hot to get out there and get it installed. (Southern heat wave) However, I was able to get out there last night and this morning to get it installed because the weather is actually...

Well, I took the old kit (L8455) back to the dealer and have them swapping out with the correct one (L8496). There are none in stock so they’ll have to get one ordered. Hopefully won’t take too long, but who knows.

Thank you for providing the part number. Apparently I picked up the wrong part number as I have the L8455 which is for the 01 series but since I have the 02 series, looks like I will need to return this kit and get the L8496 one, which is designed for the 02 series. This would explain why...

Hey guys, new to the forum but just recently acquired a 50th anniversary edition L3902 and was interested in putting in the cruise control option. It is an HST model and will be doing a lot of brush hogging with it, so will help with the long runs across the property. I have looked through the...