Recent content by jwage

I received the solenoid today and after installing it, everything is working normal again. One thing that I had wrong is it doesn't seem to send power to the solenoid by just turning the key on and off without starting the engine. I was testing it by just turning the key on and off without...

I found it. Number on the plastic box is K3111 62511 This is the replacement part https://www.messicks.com/part/k3111-62510/controller Sent from my SM-N950U using Tapatalk

That is correct. No power at all right now. I'm a newbie though so I was just worried I might be making a mistake in how I'm testing the white wire. I tested multiple times and it never gets power when the key turns to off. I read on a few other threads where the opposite happened and the thing...

While I wait for that new solenoid I wanted to do a little more research and learning. I'm trying to see where that combination box is. Does anyone happen to know? Here is a picture of the underside of the right fender. The metal box closest in the pic looks like it has the horn/speaker. I...

Thanks. I ordered the new solenoid and it gets here tomorrow. I was worried that if the combination box has an issue that it might fry the solenoid again. I will report back here tomorrow. Thanks for your help! Sent from my SM-N950U using Tapatalk

I tested the solenoid by itself already and it is confirmed to not be working. I am now trying to confirm if there is another problem with the combination box because the solenoid wire is not getting power when it should. Sent from my SM-N950U using Tapatalk

So it goes from the battery > fuse > combination box > solenoid. Then that is why the fuse always has power and the combination box is what controls only sending power to the solenoid after the key turns off. Am I able to test that wire for power with the solenoid unplugged? It never gets power...

Thanks. I checked the 20a fuse and it seems like it is still good. It looks ok and it has continuity. Is the relay after or before the fuse? I'm having trouble keeping it straight in my head. Is it battery > fuse > relay > solenoid or battery > relay > fuse > solenoid? Another thing I noticed...

Does anyone know where the timer relay is that sends the power to the solenoid? I should probably check that too.

I took the solenoid off and tested it in isolation and it is not working. I still can't explain why I can't I'm not getting power to the wire going to the solenoid. Would be crazy if the solenoid is bad and wiring is broken! I also attached screenshots of the relevant documentation for the...

First thing I tried to do was find where the white wire going to the solenoid goes to but it goes in to a bunch of wires that I can't see where they go. There is a small fuse box with 5 fuses in it and it appears a white wire comes out of the bunch and goes in but I can't get continuity between...

I researched how this machine works and it has a fuel shut off solenoid that receives 12v of power for 10 seconds when you turn the key off. It pulls an arm in which pulls another lever to stop fuel from getting to the engine. You can just manually pull this lever to stop the engine. It is...

I ended up buying a replacement here https://www.compactractorparts.com/tractor-parts/hitch-kits/adjustable-leveling-box-2

I've found where I can buy a replacement, but I don't know what size I need. https://www.compactractorparts.com/tractor-parts/hitch-kits/leveling-rods Sent from my SM-N950U using Tapatalk

MiI have a Kubota L210 and the adjustable lift arms/rods are different lengths. The threads are messed up and painted over so I can't get them to adjust. I really don't need to adjust them all the time, I just want to get them to be the same length one way or another and leave them. Today I...