Recent content by JorisFRST

  1. J

    New B6000 owner...what's this extra lever?

    Will be the creeper, very usefull for tilling heavy soil
  2. J

    What did you do to or on your Kubota today?

    Installed new belts on the flail mower. Turns out the factory ones were too long and couldn't be adjusted, was slipping from day 1. After not finding the issue for a year went to another shop and they sold me 37" belt instead of the 38" that's in the manual. :rolleyes: (they had measured all...
  3. J

    BX23SLSB-R with wood chipper?

    I've got an GEO ECO 16 (made in china), that looks exactly the same as the BX42, paid around 1000€ for it. My tractor only has 16hp at the pto, so it sometimes bugs down. It hasn't got hydraulics, but I've only missed those when trying to get small twigs in it. For all the other stuff it eats...
  4. J

    Choke on shutting down gas engine?

    My understanding is that a rich tuned engine would turn itself off when choked. why you would want to do that on any engine when you can just turn off the spark is beyond me, can't be very good for the engine to have it splutter to death before killing the spark. It won't be that bad as it's...
  5. J

    New pto water pump

    Hi, got the same one here, only issue I have is that it wants to force itself on the pto shaft and I have to get it off with a piece of wood.
  6. J

    B1600 gray import eqivalent

    Anyhow, closest model is B8200 (DT)
  7. J

    B1600 gray import eqivalent

    What info are you looking for ? They're becoming quite popular in europe ... looks they've been imported alot the last 2 years.
  8. J

    L1801 DT Top Speed of only 1mph?

    Isn't there a similar lever as the 2WD/4WD one at the other side of the seat, this might be the crawler gear.
  9. J

    Trailer Shopping

    That's effin sweet.
  10. J

    What About Your Tractor Makes You Swear?

    Heading for the kitchen...
  11. J

    New to me BX24....problems?

    This. Had to do it with most of my implements.
  12. J

    First post here, question about B7000

    I actually have one of those here, it might be usefull, you can set the box to the ground load the heavy stuff, then lift it for driving and dump the stuff where you want (limited by the height of your front lift).
  13. J

    First post here, question about B7000

    FEL is going to cost you about 2500 to 3000 Euro around here. Going to be cheaper finding a tractor with one fitted and selling yours.
  14. J

    Tiller hookup

    On Page1 of this topic you can see the pictures of his RS tiller, it's a 3 point version. (I also have the 2 point version). Also, he has the standard B1600DT setup, which has the U shaped parts, but which he doesn't need for his tiller.
  15. J

    Tiller hookup

    Edited :) Smaller picture now.