Recent content by jnschnit

Is the 3pt moving up and down fully? If it is your probably looking at some kind of a bind in the linkage.

Have you checked the forward/reverse pedal neutral position? These tractors have problems with the pedal not returning all the way to neutral when released. That would cause the tractor to shut off when you stand up since it thinks it is still in gear.

Here's a link to the parts diagram for a BH65 Mount to the B2620 https://shop.kubotausa.com/oemparts/a/kub/6091acfa87a86614f81c346c/b80000-mount-kit-option Here's the link to the BH70 Mount on the B2601...

Just to level set, are you talking about the Kubota BH70 or the Woods BH70? The Kubota BH70 is for the B2601 Tractor. The B2620 uses the Kubota BH65. In either case they are mounted via frame mount. Check Youtube for a video of a dealer installing the frame on a B2601.

I am sure others will chime in. I have 5 acres and mow 4. I have a B2601 TLB, MMM which is probably more than you need. My son has 2.5 acres and had a BX1860 with a loader and mmm, it seemed to do a good job for him. He just traded it in for a BX2680 and is very happy with it. Both machines have...

Have you downloaded the 2601 service manual? If not, here's the link for the pdf download. Might help you or us to isolate the problem. https://kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/ Looking at the schematic the 10A fuse you mention is fed off the key switch...

May help if you have a service manual. I had one but sent it with my B2620 when I traded it in for my B2601. I searched and it looks like the Kubotamanual site has it on sale for $30. Its a pdf download https://www.kubotamanual.com/store/products/kubota-b2320-b2620-b2920-service-manual-wsm-download

My B2601 floor mat also goes over the hump. Someone probably tucked it underneath to hold the mat in place.

This is what I use on my B2601, B2620, BX1860. Works great. https://www.lowes.com/pd/CRAFTSMAN-Automotive-Locking-Oil-Filter-Pliers/1003096256

Same on my B2620 and now my B2601. Just have to be careful. Yes, I have dumped the bucket when backing up.

You may want to check on a reply that North Idaho Wolfman posted back in 2016. He lists the parts that are involved in centering the pedal. http://www.orangetractortalks.com/forums/threads/hst-pedal-damper.26989/

I don't know if I would bother with the stone dust? I assume your going to add on to that beautiful brick patio? If so if it is damp it may help when you go to pack it down. Besides the stone dust will drain where as it would take a long time for the topsoil to dry.

There are several youtube videos showing you how to remove and install the backhoe. Use this search at https://www.youtube.com/results?search_query=b2601+backhoe+removal. Just make sure you are on level ground when you take it off. If not, it can be a real pain to reinstall it. Also make...

I agree with maybe something with the seat switch because that is what you were moving when it cut off. Also did you check the treadle pedal interlock switch? The service manual pdf for the b2601 is available on the kubota books website under the tractor owners manual section. Here's the link...

Kubota Books has the B2301-b2601 Service Manual PDF available download https://kubotabooks.com/AutoIndex/