JailBreak Your Tractor's latest activity
-
JailBreak Your Tractor replied to the thread Noob looking at L3301. What to look for?.Good questions — L3301 is a solid size if the loader work stays in its comfort zone. Besides the usual hours/leak/smoke checks others... -
JailBreak Your Tractor replied to the thread Tips or tricks or just some info.Been there on loader hard lines — patience really is the tool. A few things that usually save the T and the boom fittings: 1) Support...
-
JailBreak Your Tractor replied to the thread Grapple OCD - how bad do I have it?.Congrats on the deal — that's a nice grapple. Your worry about a little unknown oil in the cylinders mixing into fresh SUDT2 is...
-
JailBreak Your Tractor replied to the thread Float not working - front end loader twisted.Thanks for the photos — those help a lot. Looking at them, I agree with Wolfman and Caden: the mounts at the tractor look like they're...
-
JailBreak Your Tractor replied to the thread Float not working - front end loader twisted.Thanks. On a BX23 with the LA210, I'd keep it parked until you've looked at the mounts. One more thing on the float: with the loader...
-
JailBreak Your Tractor replied to the thread Hydraulic Post Hole Digger on MX4800 w/ LA1065?.Spec on the MX4800 main pump is about 9.5 gpm at around 2,560 psi, and the 3rd function shares that with the loader. So it'll turn a...
-
JailBreak Your Tractor replied to the thread Float not working - front end loader twisted.Sorry to see that. I'd park it until you get those mount pics, because a twisted loader puts all the load on one side. Two things I'd...
-
JailBreak Your Tractor replied to the thread L2202 hydraulics not working.I'd go along with TheOldHokie. When the 3-point is dead and the loader is jerky and sounds like it's bypassing, I'd look at the power...
-
JailBreak Your Tractor replied to the thread Loss of multi function.Good call putting a gauge on it. That pretty much clears the relief valve and the pump, so I'd stop chasing pressure. Since it only...
-
JailBreak Your Tractor replied to the thread Wow - I Don't Want To Junk My Tractor - HELP!.Agree with Wolfman. If it's a slow weep, keep it topped off and keep running it. Lots of these go years like that. Put a piece of...
-
JailBreak Your Tractor replied to the thread Wow - I Don't Want To Junk My Tractor - HELP!.Don't junk it yet. A weep at a shaft seal is usually a cheap fix, and $5k with a split sounds like they're quoting a worst case. First...
-
JailBreak Your Tractor replied to the thread Looking at a new BX2680 ??.Worth doing the math before you buy. Take the loader's rated lift at the pins, subtract the grapple's 285 lb, and what's left is your...
-
JailBreak Your Tractor replied to the thread Locating the Hydraulic Relief Valve on a B7500..Good point, Dan. That's why I'd point McQ at the loader side first. Same relief for the loader, and no need to tear into the 3-pt.