Recent content by Jack Lithgoe

Yes, L2900. Key was on a floating key ring like for an outboard motor. Also with a key to the shed. Must have been swept away during a flood. Fortunately the big orange thing was on higher ground than the shed. Thanks for your help 85Hokie.

How do I replace a lost ignition key

MDHughes, You responded to this question a few years ago. I have a similar question. The illustration shows the parts that make up the steering cylinder for a gang of Kubota tractors. Mine is a L2900DT 4wd. I also found it in the parts manual (pdf). Can you tell how to get a complete seal...

Seems like a good plan. If tomorrows weather permits, I'll get on it. Thanks for your help!

There could have been a short answer to your question NI Wolfman, but I started troubleshooting at the dumb end and worked forward to the throttle control plate. I feel the sticking at the TCP. Tx

I removed the foot throttle rod link and the hand throttle rod link from the common connecting link mounted on the firewall. The 30 inch offset connecting rod is now only connected at the throttle body. I can advance the throttle easily by hand, but I have to apply more force to disengage the...

L2900 throttle sticks but can be un-stuck by lifting the foot pedal or manually pulling the throttle by hand (under the hood) The linkages have been disconnected to rule them out. Just feels like the throttle is tight or has a sticking point. Is the cap nut on top of the throttle body a...