Henro's latest activity
-
-
Henro replied to the thread Daily Chuckle.Does the last symbol on the second line represent the peace sign or a number? I’m guessing that’s the way we speak here in Western...
-
-
Henro replied to the thread Refurb electric motor.“I had to stick my finger in the pulley hole to help it but once it got going, it could handle the load.” I don’t know what pulley hole...
-
Henro replied to the thread Tilt cylinder leaking BX23 LA210-1.Couple years ago I had the tilt cylinders on my B2 910 rebuilt by hydraulic shop in Pittsburgh. I dropped them off and picked them up a...
-
Henro replied to the thread Daily Chuckle.
-
-
Henro replied to the thread pin hole rear wheel on BX 2370.Or you could consider keeping both tires and wheels, removing the liquid fill, and having them filled with foam which is even better...
-
Henro replied to the thread BX 23S PTO damage.Sounds like the mower deck was lowered to the ground to cutting position, when the issue became apparent. And that the PTO was likely...
-
Henro replied to the thread BX 23S PTO damage.Thanks for that Bee-Positive. I was trying to remember what I did to get the PTO to turn freely, and I must put the lever between...
-
Henro replied to the thread Grinding noise.I remember reading it in the manual I THINK. I do know that from new I did find grease in the covers above the blades, which then made...
-
Henro replied to the thread BX 23S PTO damage.I’ll be interesting in hearing the replies to the question because I wasn’t aware there was a brake that serves to restrict or stop...
-
Henro replied to the thread Grinding noise.Something‘s not quite adding up here. If the whole assembly is “loose" the issue would have to be more than just the spindle. For an...
-
I think everybody can agree, however many there are, there just aren't enough of them...
-
2?
-
A blade on a deck should not come loose. That's why we asked to check the washers, shims etc. and to use the correct tightening torque...
