Recent content by Happy13

Hi Wolfman, Thanks for the input. This may be one of the very early models. the drawing shows a shaft with a nut on the end. so i'm wondering if some heat and holding the other end fast may break it loose. Carrie @ Flailmaster was kind enough to send me the manual. Thx Jim

I have an ancient Mott Flail Mower HD72 The Roller lost a bearing. Any idea how this comes apart. I suspect is is a nut but I don't want to start twisting things off if they're not meant to doo that. I have a schematic but its nor very clear. Getting a replacement protective casting would...

Hi Dan, Just a follow up on the PB issue. Experience is everything. Received the P40G-PB sleeve last night. Works like it's supposed to. Imagine! The 1/2" BSPP male on the right angle adapter (Parker product) was fairly sloppy fitting into the SAE 10 female on the P40G but sealed perfectly...

My L3600 fit nicely with the backhoe or blower attached in an 8' x 20' x 8' Nice to not have to cover or brush off the snow.

Really good stuff Dan, I understand the concept. This makes sense. If I were to find this schematic and section I would say "hey that's not my valve" but it is. Just the way I absorb stuff. The way I learn best is by watching an example and seeing it work. All of my mentors are gone now...

Well Dan, I can thank you enough for the attention that you offer here. I know that the N port on the valve is a 1/2" BSPP. I ordered the sleeve this morning but wasn't sure why it would work. I constantly seek the engineering down to the last detail (which drives most people crazy) and this is...

Hi Dan, I appreciate the advice. I will look into the sleeve you mentioned. Best Regards, Jim

Hi Dave, Thanks for the input. I'm learning a lot but there's more to go. Jim

I have an L3600 with an LA680. A local Kubota Dealer installed a Bradco 509 backhoe about 10 years ago. The Power Beyond from the Loader block gets disconnected from the 3 point lift line (via quick connects) to power the Backhoe. Works great. The 3 point lift is disabled but isn't needed when...