Recent content by GrandKubota

Thank you very much for this diagram and the other comments. Paul

Hello Everyone, I am tired of sitting on an angle. My tractor needs a complete rebuild of the bushing and bolt arrangement for the hinge arrangement. Does anyone have a kit number or part numbers for this tractor? I gather this seat arrangement is the same for many tractors. Thank you Paul

Problem(s) solved. Several little things were a miss here 1) Both suction screens were not clean. The transmission one more so than the Hydraulic one. 2) Drained the oil and found it to be very thin and well used. Therefore not optimum for power and probably had no antifoaming agent left in...

Thank you< I will run it with the vent out and the cover off for a few runs. Looking at the cover very carefully it appears the cover has 100 % contact with the block it sits on. There also appears to be a light coating, like maybe a few thousands thick of gasket( IE permatex) on the block...

Hello North Idaho wolf man: As an added note to the above. When the fund was changed I did not flush out the gearbox. I have never done this and was hesitant. Would you suggest diesel or kerosene and would you recommend running the unit or not. I am worried about devarnishing the seals and...

Hi:This happens more in the severe cold weather, but will happen very rarely in the summer. The filter and oil was changed this summer. I did not notice if the oil was milky but the next time it happens I certainly will. the amount of oil is about one or two measuring cups in volume, it does...

Hello: This is my first post, hope it is done correctly. My tractor is a b1750 HST. Occasionally the transmission pushes oil out of the tranny vent behind the drivers seat when the tractor is shut off. I have made sure the fluids level is correct and not overfilled. Hope I get help from all of...

Hi Iam new to this site. Where / how do you post a question.thanks