Recent content by FOXHAVEN

My adjustable stabilizers have been one of the best improvements I've made. My two cents on the subject if they are worth that is keep in mind that the geometry is not perfect on these setups. It is important to observe a full lift and drop before you go to work looking and listening for...

Can't speak to the prices but I recommend you check out "GP Outdoors" on you tube, he does a lot of tasks using a B2601. It may give you some insight on what size tractor is best for you and your projects.

The PTO on my L2501 is cable operated and does not disengage most of the time. I can sometimes wiggle the cable just under the lever and it will disengage other times I have to cycle the throttle and depress the clutch repeatedly to get it to disengage. Could use suggestions on adjustment or...

My trailer is a 16 foot and a tight squeeze also. check out the attached pics. This set up has my tractor farther back, I used to set the bucket on the tongue. The hitch I use now is lower and the ball is closer to the receiver. This setup eliminated the jerking and the front axle tires getting...

Great pics. I went cheap on the trailer but having seen your trailer I may keep my eye out for a tilt, my Hudson is an old style flat bed equipment with the drop down ramps. I new I was lifting the truck some when loading but I guess I had the tractor in four wheel the other times, this last...

Thanks for the reply. I'm in the same situation with varying implements and loader attachments. I ran into a hitch on trying to determine the best spot on the trailer to load to when I tried to secure my ramps with the finish mower hooked up. The ramps come in contact with the mower right on the...

Thanks for the suggestions guys. I'll start working up the numbers experimenting with position and see what I come up with. I'll let you know what I did and how my next tow goes. Right now I'm just happy I got the lighting and brakes to work correctly for all three trailers on my truck trailers...

Might sound a bit excessive to some of you but here goes. I have an L2501 4x4 with the 525 loader and QA bucket option. I tow this tractor around using a couple different trailers and am wondering does anyone know where the load center is on this tractor. I've figured out where the load center...