Fordtech86's latest activity
-
Fordtech86 replied to the thread L2501 temp question - first time diesel owner.Me too! Don’t have to worry about my temp gauge in sub 40 degree temps cause the tractor isn’t getting started 🤣🤣🤣 -
Most older cars & trucks are exactly like this. It's a common problem when that diaphragm gets old. They get brittle, they leak, and...
-
You wouldn't stand out too much in Florida. There are a lot of people still moving in from all over the country because they don't like...
-
Fordtech86 replied to the thread Electric Car in your future?.https://pledgetimes.com/stop-electric-cars-due-to-the-energy-crisis/
-
-
Fordtech86 replied to the thread Smoke and run-on.Mechanical lift pump mounted on the block, runs off the fuel cam, they can leak fuel into the crankcase.
-
-
Motorcycles have headlights?!? 😂
-
Fordtech86 replied to the thread Daily Chuckle.
-
-
Fordtech86 replied to the thread Smoke and run-on.The lift pump leaks fuels into the crankcase, causing oil level to increase, once it gets full enough it can start pulling the oil/fuel...
-
Fordtech86 replied to the thread Lx3310 hard starting.It’s not a throttle plate, it blocks off the fresh air to pull more exhaust gas through EGR.
-
It took me 50 hours to get to the 50 hour service change :p To total those 50 hours it took me ~8 months of tractor work and I...
-
I had to stop and snap a photo as I was returning to the house after doing chores today.
-
Fordtech86 replied to the thread Gear heads.doesnt matter, they still gonna have to be programmed back… edit: this is if you have seperate wheels/sensors for each set of tires...
-
Fordtech86 replied to the thread Cold starts: what is your preferred RPM setting??.IAC valves, air injection pumps, what the hell is a carburetor? 😂 think that info maybe be 20 plus years past it’s prime 🤣 but they do...
-
Fordtech86 replied to the thread Gear heads..
