Recent content by Firefox

Sold one just like it 3 yrs ago for 5400. Sims cab/with heater,bucket,forks,60” belly mower,snow blade. lots of hours but all working and looking good. Does that one start and operate ok ?? How many hours ??

Had that happen to my b-2650 once. Reached in the cab, put the key in and twist-no resistance!!! I put the cab key in instead and it would not come out!!! Finally after removing ignition switch( with the wrong key) from dash,got it to release the key. I will not do that again. lol

Replaced that switch 4 or 5 yrs ago on my old 7200hst. Remove screws under dashboard corners(maybe center), will come out and up enough to access wiring behind dash. I found cooked terminals on junction block between dash wiring and harness going to front of tractor. Cut block out and crimp each...

Driveway sensor that beeps(inside house and workshop) with motion Tied into ”Moose” security sys( I installed about 20 yrs ago which monitors all doors. Also “Nest” cameras that monitor front yard(driveway),and backyard,and one inside when away from home. Internet based (iPhone/iPad with 5/10...

Not much rain here,but warm weather sure got the moles active in the yard. Well -they were active. Gotta catch then in the yard before they to the mulch(landscaping around the house). Walk lightly behind movement and pop out of the ground with a shovel.

Been around poison ivy for years and never had an issue with it. Cut,process,and burn wood with dead vines and removed with and without gloves. I would guess a scratch from a live vine on my leg would not be good,but hands are pretty tough. Just don’t touch face and wash hands.

48 inch is the right size for me. Gives full reach ,Full depth in standard pallet, any shorter and could not see fork tips in drivers seat(Guiding into pallet )Without standing up.Land pride-"48 weight is 350 pounds but still can lift just shy of 1000 pounds off the ground.(Pallet of hardwood)

Just sold(last year) my 7200hst-d with pwr steering that was dealer install when it was new (85-86).Worked great for the 11 yrs I owned it . Had a cylinder on the side to the steering knuckle. Pulled the fuel tank once(wiring issues behind the dash),and was surprised at all hyd lines in...

Yep A titan box for about 250$ with 6-700# works great for the B tractors with max load on lp forks. No filled tires but cab model (500#) Box about half full of lead and steel. The only thing I didn't like was that red color It came in.

Snowmobile dollys work great for that situation,height about 2" and platform about 9x9". Worked for me.(one replacement knee)

Wow !!! With all that you also should get the Kubota flashlight,mug,license plate,and 4 different Kubota hats. That's what I got last year buying the same model but little did I know their business closed about six months later so maybe there was just getting rid of their sales freebe...

Would recommend 48" forks which give more reach and visiblity of fork tips at ground level from seat .My dealer had Land Pride brand .900.00. Wt is about 350#and still lift 950# pallet of hardwood 4"off ground. (B2650hstc)

My guess is the same wiring harness may also be used on the b3350hsdc unit which utilizes the Dpf/regen sys. I have to get a set of those rear work lights ordered for my cab.

You will love that tractor when you get it. A large piece of cardboard works great to slide underneath it due to the clearance. I suppose you could drive up four matching automotive ramps but that could be very dangerous . Tractors do not have wide Frame lift points for a car lift

Chainsaw would be quickest.Cut 2or 3 inches above ground,clear with that 2650 (grapple or forks),rent a stump grinder(walk behind)for one day. Good luck!!!