evantwheeler's latest activity
-
evantwheeler reacted to TheOldHokie's post in the thread L1720 / L345dt Loader Operation Troubleshooting Help with
Like.
I am talking about testing flows in and out of the ports in response to movements of the control vakve. A pressure gauge is a helpful... -
evantwheeler replied to the thread L1720 / L345dt Loader Operation Troubleshooting Help.By test the circuits, I assume you mean pressure test? Looking at parts on SurplusCenter.com to put together pressure gauge assemblies...
-
Solved the charging system issue and the regulator wiring configuration. I had the right regulator, but the pin location was incorrect...
-
evantwheeler reacted to Russell King's post in the thread L305DT lift arms not working right with Like.
There is a vent and they often get plugged by insect’s building a nest in them. You can remove the vent and clean it out with a wire...
-
P and T are labels on ports. What they mean and how they operate is ambiguous. There are multiple circuits in an open center hydraulic...
-
evantwheeler reacted to PoTreeBoy's post in the thread L1720 / L345dt Loader Operation Troubleshooting Help with Like.
I suspect you're right. But confirm that fluid was running out of that hose into the fill port, right?
-
evantwheeler replied to the thread L1720 / L345dt Loader Operation Troubleshooting Help.Correct, even when I was trying to lift the boom cylinders was still decent getting return flow to the fill port.
-
evantwheeler reacted to PoTreeBoy's post in the thread L1720 / L345dt Loader Operation Troubleshooting Help with Like.
If you have time, remove the 'return' hose from the hydraulic block and stick the end in the hydraulic fill port. Start the tractor and...
-
evantwheeler replied to the thread L1720 / L345dt Loader Operation Troubleshooting Help.Went out and tried it, no change. Thanks for the suggestion. Took lots of RPM to get boom cylinders to extend and still no reaction...
-
evantwheeler replied to the thread L1720 / L345dt Loader Operation Troubleshooting Help.I have completed steps 1-4, and am back at the same place that I started. The oil comes from the hose connected to the front port of...
-
evantwheeler reacted to Russell King's post in the thread L1720 / L345dt Loader Operation Troubleshooting Help with Like.
@evantwheeler See post #1 in this thread that shows a similar hydraulic tap block as what you have on the tractor. It shows how the...
-
evantwheeler replied to the thread L1720 / L345dt Loader Operation Troubleshooting Help.More data. Went and played with the 345 lift cylinders with this hose configuration. I lifted the arms & bucket all the way up, lift...
-
evantwheeler replied to the thread L1720 / L345dt Loader Operation Troubleshooting Help.I'm just confused by this. I have (2) tractors both plumbed the same and functioned "fine". Front port of hydraulic block to "in"...
-
-
evantwheeler reacted to PoTreeBoy's post in the thread L1720 / L345dt Loader Operation Troubleshooting Help with Like.
Just for grins, make sure your 3ph valve is lowered. Does this machine have draft control?
-
evantwheeler replied to the thread L1720 / L345dt Loader Operation Troubleshooting Help.I was searching the forum earlier and ran across the same suggestion made to other members regarding troubleshooting the 1720 FEL, so I...
-
