Recent content by Doug Alford

Never mind on the previous question. After looking at pedal diagram i realized the bottom of spool doesnt turn to allow hydraulic oil in the thumb hoses but pedal raises and lowers the rod to spool to distribute hydraulic oil... shoukd have seen that earlier... Doug

Hi, I have purchased and installed thumb, hoses and spool on my l35. Before i instslled the pedal i turned on machine and turned the axle at bottom of spool to be sure everything was working. I turned all the way one way then the other. I left the top hose unhooked so i could see if fluid was...

I did have couple more questions. I did notice Raleigh used 3 section of hose. Fo you think it would be best to do that or would one hose all the way work? And woyld 1/4 inch be best especially on going thru main trunk. Did you usr the one ft. Bucket or 2 foot bucket with the thumb. Or does...

Thanks. That gives me about all I needed to know. For now anyway. That's very helpful. Thanks!

All the parts including the pedal itself that attached to the valve.

Do you know the part numbers I need to order for the Bh92 pedal parts.

Hi, I was wanting to put a hydraulic thumb on my L35. I was reviewing raleighl35's post where he did this. Someone else on foreum suggested he doesn't get on forum much and for me to maybe contact you since you might have installed the modification yourself and could maybe answer any...

Hi, I was looking at a solution for adding a hydraulic thumb to my L35. Someone suggested your link. After reviewing I think it's the best solution I've seen. I have couple questions. Is the petal on left because they hudraulics have to be connected there or can it also be on right? The pedal

Thanks for your input. So I am not familiar with the spool valve. Where would lines from hydraulic cylinder on thumb be connected to? And how would you control the hydraulics to thumb.

I have a l35 with fel and backhoe. Also have a w r long third function kit installed. Been using for some time with grapple and other 3rd function Implements. It is plumbed in to power beyond port. I want to add a hydraulic Thumb to the backhoe. I would like to use existing 3rd function...