Recent content by Cottonwood

What good is a snowblower that you can’t lift with the PTO running? (Asking for a friend)

I have 2 F2560 mowers, one since about 2004. In 2022 I acquired a 2007 one (I think the last year they were made). It had 500 hrs and was spotless. I decided to acquire a F5210B snowblower for it, which proved more daunting than I imagined. I finally stumbled unto a new one, which had only been...

I have a 1992 G2000 AWS for sale. 1341 hours. This is a 3 cylinder gas engine version of the G1900. Includes a 60” deck, 47” snowblower, and a 3 bag leaf bagger. All in good condition. The snow blower had the drive sprockets, chain, and bearings replaced about 2 years ago. Main reason for...

I have owned a 1997 F2560 since 2004. Great machine, bullet proof. In an earlier post I mentioned that the forward/reverse treadle will sometimes become sticky and hard to work. I read somewhere that spraying silicone on a moving part in front of the battery, inside the frame rail helps...

I have a F2560 front mount mower tractor. When I want to reverse the tractor the pedal pushes very hard, but forward seems normal. When the engine is not running the pedal moves in either direction without any difference in resistance. Any ideas or solutions? Thanks.

Looking for a F5210B snowblower to fit my F2560 front mount mower. I am told these are no longer available new from Kubota. If you have one, or know of one I would appreciate hearing from you. Thanks.

Looking for a snowblower for my F2560. i am told that Kubota no longer makes them new. Also told that the model F5210B is the correct model for an F2560. Thanks.

Looking for a F5210B snowblower for an F2560 Front mount tractor. If you have one, or know of a source let me know. Thanks.

I am looking for a snowblower for my F2560. The snowblower is a model F5203B. According to my dealer they are discontinued, so I would need to find something used. Anyone know of one, drop me a line. Thanks.

DONT buy a chipper without a hydraulic feed.

Looking for a F5203B snowblower that fits a F2560 front mount. If you have one or know of one please let me know. Thanks.

Looking for a G1900 with AWS.

Thanks for the info :)

I have a F2560 with a 72” deck. It’s a wonderful machine. But the two small gauge wheel tires on the front are frustrating. The stems are buried into the wheel, and are really hard to access. now one tire has a slow leak. BTW, they are tube type. Needless to say I can simply take it off and put...

Last summer when I would fill my F2560 with fuel to the bottom of the neck as I had done for the previous umpteen years, it would drip past the tank and unto the floor. The only thing that makes sense to me is that there is a gasket on that top mounted tank gauge that is shot? The little I can...