Recent content by clarksvilleal

I have this one for my LX3310:(https://homesteadimplements.com/root-grapple-pinnacle-series/) Haven't used it a whole lot yet - just got it last fall. I too plan to use it for brush most of the time, but also expect it to help with grading, digging up big roots, pulling up small trees, etc. I...

Bump (Price lowered)

One pair of 48" hydraulic hose assemblies, brand new, never used. Hose: 3/8" Ryco Diehard T6000, 6100 PSI, JIC-6 swivel, 9/16" Female thread, to 1/2" body flat face (one male, one female). $45 plus shipping for both. .

Mounted my new Piranha Tooth Bar on the LX3310.

Installed 3 Bolt-On hooks and clevis mounts on my LX3310 60" bucket:

County Line brand. 3-point hitch, reversible. Never used, like new condition except for a few small rust spots (may be additional rust on bottom; haven't looked). Not compatible with John Deere iMatch, don’t know about other types of quick hitches. Bucket itself is 30” wide x 30” deep x 11”...

In tractor lingo the "Top" in "Top and Tilt" refers to a hydraulic cylinder that replaces the mechanical top link and yes, enables you to tilt the implement forward and back. The "Tilt" refers to another hydraulic cylinder that replaces one of the 3PH lift rods that raise and lower the lift...

Put a Top-n-Tilt kit from FitRite Hydraulics on the new LX3310. Looks great, works like a charm. (Yeah, I know -- gotta repaint that ugly iMatch Kubota gray. First on my list of winter projects.)

Great pictures, mcm. Thanks. I still plan to go with the STB1072, which the dealer is telling me is the appropriate size for the LX3310. And after a discussion with the dealer I have also decided on the dual cylinder option. He confirmed what Sleddog said about needing the dual cylinder for...

Thanks for the reply, Jim. I'm in an area where we don't get really big snowfalls (big for us -- 1' or more) more than once every 8 or 10 years. Most years we do get at least one and often 2 or 3 from 6 - 10 inches that require me to get the Ariens snowblower out, which can take several hours...

I have an LX3310 / LA535 on order. I am thinking seriously about getting the Land Pride STB1072 Snow Blade, for both snow removal and light grading (in locked blade configuration, for moving/spreading loose dirt, mulch, gravel, etc., per the Land Pride manual). I plan to get it equipped with a...

A little off topic, but last year my washing machine wouldn't run through a complete cycle - it would get stuck during the agitate cycle and just agitate forever - never went into drain & spin. Bought a new timer, and when I took the old timer out and took the cover off, I found a stink bug...

Re: B2910 Problems Starting - Problem Solved, Learned a Lot Well, after learning how to remove the control panel, ignition switch and the black plastic shroud behind it, I found the problem, which had nothing to do with the ignition switch - and in the end I did not need to remove anything...

I had the same problem, but in addition the glowplug light would sometimes go on while the tractor was running. I am suspecting the ignition switch may be bad or have a loose connection. I am able to successfully start the tractor by connecting a remote starter switch to to the starter - one...