BX25D Rookie's latest activity
-
BX25D Rookie replied to the thread Oil Pressure Driving Me Crazy - Not Cam Plug.I had a Bayliner 17' bow rider boat. Long gone now. It had the marine version of the Ford Pinto 4 cylinder overhead cam engine. 2.3... -
BX25D Rookie replied to the thread Buying several Kubota tractors, building a Camp, and maintaining 69 acres of recreational/hunting property..I tried a Milwaukee battery powered high pressure grease gun yesterday. The stiff hinges on one door are noticeably better, but there is...
-
BX25D Rookie replied to the thread Tachometer 'Flutter'.Back when I repaired cars/trucks professionally, speedometers were still cable driven. When the speedometer needle wiggled/jumped, you...
-
BX25D Rookie replied to the thread Hour meter/tach problem.Unless you are a VERY gifted electronics repair technician, there aren't any serviceable parts inside the instrument cluster other than...
-
BX25D Rookie replied to the thread Buying several Kubota tractors, building a Camp, and maintaining 69 acres of recreational/hunting property..I am likely long past the time where the container seller/installer will do anything for the stiff hinges.
-
BX25D Rookie replied to the thread Buying several Kubota tractors, building a Camp, and maintaining 69 acres of recreational/hunting property..I am not really sure if it is a hinge alignment problem, or not. It doesn't appear bent/twisted. I can say when drilling through the...
-
BX25D Rookie replied to the thread Buying several Kubota tractors, building a Camp, and maintaining 69 acres of recreational/hunting property..I have been "fighting" with the hinges on my shipping container entry doors since I purchased it. The day it was delivered at the remote...
-
BX25D Rookie replied to the thread Questions about a 2016 L3901 HST.Thank You all for the faulty model clarification. I will pass the good news to the potential new owner!
-
I recall the L3901 HST tractors having many problems with the emissions systems/regens for this vintage and model. Particularly in cold...
-
BX25D Rookie replied to the thread Bro-Tek Skidplates for BX23S and maintenance....I have the Bro-Tek rear and mid skid plates on my 2011 BX 25. (earlier version of BX 23S) Without a mid mount mower on my BX 25 (or your...
-
BX25D Rookie replied to the thread Bx23 dual wheel setup?.This BX dually topic was discussed here in February. Pictures, YouTube video, parts availability...
-
BX25D Rookie replied to the thread Replacing a bx2380 trans with one from a 50 series..I would like to know if the OP has any idea what caused that catastrophic failure. I own and use a BX 25 and a BX 2370. I would like to...
-
BX25D Rookie replied to the thread Buying several Kubota tractors, building a Camp, and maintaining 69 acres of recreational/hunting property..I've used the Kubota BX 2370 several times for mowing at the house now, but it just isn't a workout for the machine with less than one...
-
BX25D Rookie replied to the thread BT603 backhoe.Read this thread: https://www.orangetractortalks.com/forums/threads/backhoe-on-a-bx2380.47649/
-
BX25D Rookie replied to the thread Brush guard for L2501f....You just can't tell what you may find out behind a Kubota dealership. I was buying some repair parts for my BX and asked if they had a...