Bee-Positive's latest activity
-
BBee-Positive replied to the thread Kubota f2100 mower the main fuse amperage size? Thank you, Rick.This is the only other fuse I can see separate from the fuse block under the seat. Doesn't give the amperage though. Can find it on...
-
-
BBee-Positive replied to the thread New project snowblower b7100 gear.I believe this is the User / Parts manual you can download. https://www.manualslib.com/manual/2783509/Loftness-481-Est.html
-
BBee-Positive replied to the thread New to Me Kubota L225.Here's a link to the Workshop Manual if you don't already have one...
-
BBee-Positive replied to the thread Stripped Starter Bolt on Kubota TG1860.Hold the head of the bolt (starter side) with a box wrench or other appropriate means, use a chisel to split the nut off the bolt. Done...
-
BBee-Positive replied to the thread Skeets.Answer to the Ultimate Question of Life, the Universe, and Everything.
-
BThanks for the insight.
-
BBee-Positive replied to the thread Starting issues.Inspect the ground from battery to frame - clean / tighten / replace as needed. Very common issue. Inspect / clean /replace all...
-
BBee-Positive replied to the thread Any Idea Where This Nutplate Goes? LC3520HSDC.Part 120 - maybe???
-
-
BBee-Positive replied to the thread Too many choices.Depends on your budget. Can't go wrong with either the BX2680 or the B2601. I'd choose those based on the 19.5 PTO HP being the highest...
-
BBee-Positive replied to the thread L4802 DTN Blow Out Sale - Opinions please on a 48hp tractor.It appears the DTN series mounts the ROPS where the loader uprights would go. On KubotaPad the LA766 is listed under options for the...
-
BBee-Positive replied to the thread New To The Tractor World.Not sure if it matters. The users manual makes no mention of which hose goes where, just says to connect them. The chipper has a roller...
-
BBee-Positive replied to the thread Tire repair with what you have.Based on the fact that the amount of rust on the nuts, bolts, and washers matches the rust on the rim that the damage may have happened...
-
BBee-Positive replied to the thread Daily Chuckle.More importantly - did he give up welding? OMG NOOOO!!! o_O
