Go Back   OrangeTractorTalks - Everything Kubota > Members List


3rd Yr. Apprentice

007kubotaguy 007kubotaguy is offline

Visitor Messages

Showing Visitor Messages 1 to 10 of 11
  1. ASTER
    3 Days Ago
    ASTER
    hey lance i was seeing if you have, front grill support an brackets lh an rh new type b7100 hst
  2. STEVEKCMO
    01-05-2020
    STEVEKCMO
    did you get that l4150 in yet.if so, can you give me dmz on dipstick
  3. STEVEKCMO
    12-03-2019
    STEVEKCMO
    that would be great, look forward to that...steve
  4. STEVEKCMO
    11-29-2019
    STEVEKCMO
    hi there.. would you have an oil dipstick for L4150 p/n on it 17381-36411 or have one and will give me the distance from bottom to bottom of stopper..thanks mine has sliped and i can not see where it was
  5. wdlanning
    10-17-2019
    wdlanning
    Member referral to you for parts. Looking for Bevel and ring gear for L3750 front axle. I can send part number tomorrow
  6. Johnr
    07-22-2019
    Johnr
    Hello, Lance; reset my phone, may have lost messages. Touching bases to re-establish communication
  7. shooter56
    07-12-2019
    shooter56
    Hi Lance

    I was refereed to you for a part for my kubota 185f. Im looking for the tach gear box that runs the tachometer. It on the front right hand side of the engine. Anyway that the part I'm looking for.
    Pat.
  8. L245dtRCA
    03-16-2019
    L245dtRCA
    Hi Lance
    You sold the the end arm link/w bushing for my L245dt last summer. Thanks, holding up great.

    When I got it back, the shop mgr said "its a great tractor for someone who can do most of their own work" and then mentioned one of many issues: Diesel leaks out of the middle injector around the base.

    I've tried to just tighten the injector, but I lack a proper tool and/or experience.

    Anyway, the real question is what to do about the injector. I assume I need a new copper washer under it, but what kind of wrench to get at it without banging up all the tubes and lines in and out? (i actually did replace the return line from that injector as the previous owner had some crappy rubber tubing that wasn't rated for diesel. Tool suggestions, and ..seems there are places where we send these things so they can rebuild them? injectors?

    thanks if you have the time to get back to me...I am loving that orange beast!

    Dave Johnson, Molalla Oregon
  9. tab840
    12-25-2018
    tab840
    hi you have been recommend as the go to guy
    i have a b8200hst i am losing drive when the oil heats up
    new hydrostatic pack / strainers / flushed out the system
    back end oil seem ok as it lifts plough no bother etc

    any suggestions

    thanks

    andy from scotland
  10. red35X
    08-08-2018
    red35X
    Was recommended I contact you for some parts for D1803 engine, could use a head(mine is cracked in several places) and several pistons. Just need standard pistons. Could get by with just 2 pistons. Kubota part #s ...head is 1G841-03043 and the pistons are 1A041-21112. Or any one else who may have the parts. THANKS

About Me

  • About 007kubotaguy
    Biography
    kubota Mechanic Since 1978
    Location
    Herald Calif.
    Interests
    All Things Tractor
    Occupation
    Tractor Mechanic
    Equipment
    B7100DT L245DT JD 2355

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 3 Days Ago
  • Join Date: 12-23-2012
  • Referrals: 0

Friends

Showing Friends 1 to 3 of 3

All times are GMT -8. The time now is 05:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.