Go Back   OrangeTractorTalks - Everything Kubota > Members List


Master Tech

SidecarFlip SidecarFlip is offline

Visitor Messages

Showing Visitor Messages 1 to 5 of 5
  1. motionclone
    2 Weeks Ago
    motionclone
    Hey bud, dont forget the new rules: http://www.orangetractortalks.com/fo...ad.php?t=42221

    We don't want to read how only bigger "real" ag tractors can get a job done.
    We don't want to hear how we have no Idea what we are talking about.
    We don't want to read about the "I'm a real farmer and you're not".
    We don't want to here how we spend too much money, or how we don't make as much as you, or how we were foolish to buy something.
    We don't want to keep hearing how or this or that does not match up to your this or that.
    We don't want to hear how you've been there and done that in every single trade known to mankind, and how many businesses you own or operate.
  2. SidecarFlip
    4 Weeks Ago
    SidecarFlip
    It tends to steer it, especially when I'm pushing a lot of snow. What I did was buy a set of tire chains just for the front wheels (not the rear) and that eliminates the plow steer issue entirely. In my case I have to remove my front fenders or the chains will hit them. All I did was run a set of hoses from the back to the front with quick disconnects at the loader valve so I can remove the loader. I fabbed up a mount to mount the fittings on the front of the loader arms and zip tied the hoses to the existing pipes that run up the loader arms. Out back, a set of Pioneer males to engage one of my 3 remotes and I angle the plow with the remote lever. The plow I bought (10 foot county plow) already had the Bobcat style hitch plate welded to the plow 'A' frame so I didn't need to do that. I run an ATI heavy duty 2 pin quick detach on the front, the Kubota OEM quick hitch isn't stout enough.
  3. motionclone
    4 Weeks Ago
    motionclone
    Hey bud, dont forget the new rules: http://www.orangetractortalks.com/fo...ad.php?t=42221

    We don't want to read how only bigger "real" ag tractors can get a job done.
    We don't want to hear how we have no Idea what we are talking about.
    We don't want to read about the "I'm a real farmer and you're not".
    We don't want to here how we spend too much money, or how we don't make as much as you, or how we were foolish to buy something.
    We don't want to keep hearing how or this or that does not match up to your this or that.
    We don't want to hear how you've been there and done that in every single trade known to mankind, and how many businesses you own or operate.
  4. SidecarFlip
    01-15-2019
    SidecarFlip
    Fine so long as you don't put the loader control in 'Float". I never float the blade, I always keep it in manual down with the skid shoes just touching the ground. and I keep it rolled back a bit as well. Remember, I have an almost 10,000 pound tractor so even with that much weight, the plow will still push me around if I use the float for some reason. Rolling it back always lessens the deflect impact. I just went off one of my 3 remote valves and ran lines to and on the loader terminating at the front loader cross tube.
  5. winesalot
    01-14-2019
    winesalot
    Hi,

    I saw your post and picture about 3rd function hydraulics. I am leaning very hard on the idea of installing the 3rd function hydraulics just so I can utilize a snow plow like yours.

    My question is: how does the tractor, specifically the front wheels, handle when you are pushing snow to one side or the other with an angled blade? My concern is the tractor moving to the opposite side in stead of the snow going where you want it?

    Alan

About Me

  • About SidecarFlip
    Biography
    Retired and farming now. 3 Kubota's M9 and 105X
    Location
    S.E. Michigan
    Interests
    farming, guns and taking it easy
    Occupation
    retired
    Equipment
    M9000HDCC3 / M105X / M9000HD
  • Signature
    Way too much equipment and not enough time....

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 39 Minutes Ago
  • Join Date: 10-28-2018
  • Referrals: 1

All times are GMT -8. The time now is 06:39 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.