front end scoop FES
- Thread starter LRP
- Start date
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Re: front end coop FES
NICEEEEE.....
Were the brackets/mounts you have this all attached to already on the tractor for another implement or did you fabricate those as well? Oh and can you take pics of the the bracketry/mounts as well please (pivot point of arms for example). Mucho Thanx in advance.
NICEEEEE.....
Were the brackets/mounts you have this all attached to already on the tractor for another implement or did you fabricate those as well? Oh and can you take pics of the the bracketry/mounts as well please (pivot point of arms for example). Mucho Thanx in advance.
Last edited:
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Tried to search but found nothing. what is FES OHHHH.... is it suppose to be Frond End "S"coop and you accidentally mistyped the title of the thread? Am going to assume that is the case and change the Thread title since members can't edit their own title for some stupid reason in VBulletin. If I'm wrong then let me know and I'll change the title back to "Coop" instead of "Scoop"
same attach point as the snowplow I posted last week. this is simple.
light and strong. those 2 old car hood springs are plenty strong. just got done painting it. IMHO, those FEL overload these little tractors the minuet
u put it on the tractor, let alone put something in the bucket. I use the same attach point as the snowplow I posted last week. 10 minuets to change .
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Thanx for pointing that out. Since a person searching the archives a year from now would not know that; below is a link to LRP's thread on the awesome front linkage w/winch lift and snow plow he Fabbed up.
http://www.orangetractortalks.com/forums/showthread.php?t=22292
Last edited:
she,s all done. paint is still green. a short vedio showing how it resets even with a shallow dump.
http://postimg.org/gallery/1j3kcmp0u/
https://youtu.be/d4pAIUURma4
http://postimg.org/gallery/1j3kcmp0u/
https://youtu.be/d4pAIUURma4
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
ShaunBlake
New member
Lifetime Member
Equipment
B6100D; B219; Piranha bar; Hodge stabilizers; Filled Ag rears; R322T w/48" deck
Oh, man, love that workbench! Looks like I-beam legs, laminated 6" wood top, and a 1/8" steel skin. Wow!
Also like the clever scoop, and the remote mechanical latch release!
Looking at the latch, I'm curious how it will stand up when you dig in solid ground, and especially when you curl to breakout. Looks like the latch isn't strong enough for that kind of work.
Not to pick, but iff'n it was mine, I'd bend that lever latch a little forward, to eliminate the possibility of bendin up that pretty sheet metal. Otherwise its as good a rig as I have seen...
this is working awesome. about 10 lb pull on rope to dump.
the latch is plenty strong as I have about 200 loads of lifting
and breaking roots. the best part of this is IT,S IN FRONT.
much easier on my neck.
gpreuss
New member
Lifetime Member
Equipment
L3200DT w/FEL, K650 Backhoe, 5' Rotary, 40" Howard Rotavator, 6' Rhino blade