Options for replacing grey market wheel l2000dt

macattackga

macattackga

New member

Equipment
L2000DT
Feb 18, 2015
16
0
0
Fairfax
I have what I believe is a L2000DT with 8.3x22 tires.

One of the wheels has enough rust (perforation) that the bead looks like its going to let loose on over half of the wheel.
is it practical to repair this kind of corrosion?

Would wheels and tires from a L225DT (12.4x16) fit and be the correct ratio (for the 4x4)?

or are the 22" wheels readily available?

Thanks,
Mac
 
North Idaho Wolfman

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,787
5,169
113
Sandpoint, ID
If you change the rear tires you will also have to change the front tires to make it work right.
Give us these dimensions:
Front tire size
Front rim bolt count, center hole size and center from stud to stud
Rear rim bolt count, center hole size and center from stud to stud

And maybe one of us can find the right combination.
 
D

Diydave

New member

Equipment
L2202 tractor, L185f tractor
Oct 31, 2013
1,635
8
0
Gambrills, MD USA
You might be able to get a welder to patch it for you. Hard part will be to find a 22" donor rim with the same cross sectional profile. Some truck rims may fit the bill, don't know...:D
 
macattackga

macattackga

New member

Equipment
L2000DT
Feb 18, 2015
16
0
0
Fairfax
the fronts are 6.00-14.

after a little more searching it appears that:
8.3x22 tires are 37.5" diameter
12.4x16 tires are 37.6" diameter

ratio close enough?

6 lug wheels.
 
Last edited:
You must log in or register to reply here.

Top Bottom