Can't find Kubota stabilizer parts

C

coderbond

New member

Equipment
Kubota L3600
Mar 16, 2014
20
2
0
Selah, WA
Anybody know where to find these after market and affordable? The factory replacements are 250 more than a complete aftermarket kit. They're going on a Kubota L3600.

Factory Part Numbers
31351-71540, left hand
35070-71560, right hand
 

Attachments

Last edited:
bh115577

bh115577

New member

Equipment
2004 BX 2200, FEL, 60" MMM
Mar 5, 2015
123
37
0
Central NY
I believe I saw something like those in TSC last time I was there. No idea of the price or sizes though.

We have several L sires Kubatas and when we break the stabilizers they get replaced with parts from another brand tractor (green in color). Hope I don't get in trouble for that. They are cheaper and hold up better.
 
Daren Todd

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,493
7,521
113
Vilonia, Arkansas
I was able to find the crank one at tsc. Just removed the old one and took it in and matched it up.
 
85Hokie

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,912
2,731
113
Bedford - VA
coderbond said:
Anybody know where to find these after market and affordable? The factory replacements are 250 more than a complete aftermarket kit. They're going on a Kubota L3600.

Factory Part Numbers
31351-71540, left hand
35070-71560, right hand
Click to expand...

Are those adjustable? Hard to see in the photo......someone here can provide you with the measurements I am sure!:D:)
 
bh115577

bh115577

New member

Equipment
2004 BX 2200, FEL, 60" MMM
Mar 5, 2015
123
37
0
Central NY
Not sure if this will help with the sizing but this is what I've been changing them over to when they get destroyed and both sides are adjustable.

This one is about in the center of the threaded area for adjustment and is at 19.5" from center to center of where the attaching pins would go. Pins would be 16mm or 5/8 diameter and would need to be 2.5" long to go through the clevis.

Injector in the pic is one that goes in a Kubota V2003 engine to give you an idea of the size of the setup.

The 2 clevises on the ends are $23.94 each and the entire center section is $54.85.
 

Attachments

Daren Todd

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,493
7,521
113
Vilonia, Arkansas
Looking at his pic at the top of the page, it looks like the op is looking for the piece that attaches the upper and lower lift arms for the three point hitch. Not the ones for the side to side sway. At least those are the ones circled in the pic :p
 
C

coderbond

New member

Equipment
Kubota L3600
Mar 16, 2014
20
2
0
Selah, WA
Sorry, I are dumb... not sure what the part is called.... maybe that's why I can't find one on the internet... searching the wrong term..

What the part called? :confused:
 
Daren Todd

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,493
7,521
113
Vilonia, Arkansas
Lift rod assembly is the right hand side. Left hand side is the lift rod :D according to my parts list for the l185
 
You must log in or register to reply here.

Top Bottom