I was following my manual and changing 80W90 gear oil in both front wheel hubs, axle housing. and steering box. I have a non HST model. I found a very small drain plug and fill plug both of which are 10mm bolt heads in a housing that the front drive shaft enters into. The fill hole is about half way up the housing and located very near the engine oil drain plug. My manual makes no mention of these 10 mm plugs. I removed the drain plug and nothing came out. Does anything go into this housing. The fill hole and drain holes are really really small for 90w gear oil it seems to me. The drive shaft at this housing is covered with a rubber boot and clamp. This housing then bolts to the front differential case. Thanks in advance for the help.
http://i1285.photobucket.com/albums/a582/visora/IMG_1062300x225_zpsccf9e0db.jpg
http://s1285.photobucket.com/user/visora/media/IMG_1063300x225_zps29a7bb4e.jpg.html?sort=3&o=0
http://i1285.photobucket.com/albums/a582/visora/IMG_1062300x225_zpsccf9e0db.jpg
http://s1285.photobucket.com/user/visora/media/IMG_1063300x225_zps29a7bb4e.jpg.html?sort=3&o=0
Last edited: