Billdog350
Member
Equipment
Kubota L3710 HST,L2230A QT,forks,Takeuchi TB125, 60" Luck Now pto Snowblower
Selling the engine and flywheel out of my dad's L48 kubota. It swallowed a bit of water and the engine stopped. There are no holes in the block but it is assumed that there is a broken or bent rod since the engine will not rotate even with injectors and glow plugs removed.
The oil was drained within 24hrs of the ingestion of water so there should be no rust or damage inside the motor.
Perfect project for a tinkerer to make some serious money, replace a few rods and a nicked cam and this motor in running order should be worth $3000+
Engine was well maintained with no oil consumption, knocking, or other issues before the problem.
Injection pump and injectors are good, water pump was replaced a few months ago, etc.
$1000 obo. Will post pictures soon.
The oil was drained within 24hrs of the ingestion of water so there should be no rust or damage inside the motor.
Perfect project for a tinkerer to make some serious money, replace a few rods and a nicked cam and this motor in running order should be worth $3000+
Engine was well maintained with no oil consumption, knocking, or other issues before the problem.
Injection pump and injectors are good, water pump was replaced a few months ago, etc.
$1000 obo. Will post pictures soon.