(FOUND) D750/850/950 engine

iangoround

Member

Equipment
B7100HST w/ L1630
May 13, 2019
39
0
6
Rochester, NY
I just came in to a B7100HST 4x4 with a 70xxx serial that has a bad rod knock. I'm looking for a replacement engine. I'm not opposed to doing a little work to swap in a D850 or D950 if it means a little more power and a water pump.

Let me know what you have. I'm located in Rochester, NY and will travel a few hundred miles for a deal, or pay freight if the price is right.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
Re: Looking for a D750/850/950 engine

I just came in to a B7100HST 4x4 with a 70xxx serial that has a bad rod knock. I'm looking for a replacement engine. I'm not opposed to doing a little work to swap in a D850 or D950 if it means a little more power and a water pump.

Let me know what you have. I'm located in Rochester, NY and will travel a few hundred miles for a deal, or pay freight if the price is right.
You might be better off rebuilding what you have, the D750's, D850's, and D950's are getting harder and harder to find, and finding a good one is even harder!
 

Jimc3165

Member

Equipment
1982 B7100 HST-D
Jul 22, 2015
130
0
16
CLEVELAND, GA
Re: Looking for a D750/850/950 engine

Contact this forum member cviola2005 I was looking a month or 2 ago and he had a D950 at the time.
 

iangoround

Member

Equipment
B7100HST w/ L1630
May 13, 2019
39
0
6
Rochester, NY
Re: Looking for a D750/850/950 engine

You might be better off rebuilding what you have, the D750's, D850's, and D950's are getting harder and harder to find, and finding a good one is even harder!
That's an option, and I'll probably wind up rebuilding this one when I take it out. I've got a lot of projects I want to tackle around here though and a swap would be much faster. Judging by the amount of metal in the oil filter this thing is going to need to be tanked, crank and rods resized, etc. Won't be my first time rebuilding an engine, but it's racing season so getting in and out of a machine shop in a timely fashion is a non-starter.
 

iangoround

Member

Equipment
B7100HST w/ L1630
May 13, 2019
39
0
6
Rochester, NY
Re: Looking for a D750/850/950 engine

I've located a used D850 with about 1300 hours -- roughly the same as my hour meter indicates currently -- and am having it shipped.

Thank you all.
 

JackJ

Member

Equipment
BX1870-1
Mar 14, 2016
264
3
18
Indiana
Re: Looking for a D750/850/950 engine

I've located a used D850 with about 1300 hours -- roughly the same as my hour meter indicates currently -- and am having it shipped.
If you've got the inclination to document the swap with photos and share it here, many of us would love to see it. I hope it goes smoothly.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
Re: Looking for a D750/850/950 engine

If you've got the inclination to document the swap with photos and share it here, many of us would love to see it. I hope it goes smoothly.
Depending on which D850 he has gotten, as that model came equipped thermo sipon or water pump, it will either be a strait motor change out or he'll have to change a few things.