Fan belt

Kubotasidewalkdude

New member

Equipment
L3940 HST
Dec 6, 2016
43
0
0
Canada
How does one change the fan belt on an L3940 HST? Had a look at it yesterday as the belt is at max tension and almost done.


Sent from my iPhone using Tapatalk
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,271
2,104
113
Bedford - VA
How does one change the fan belt on an L3940 HST? Had a look at it yesterday as the belt is at max tension and almost done.


Sent from my iPhone using Tapatalk
First and foremost - find you a work shop manual, and or do research here.
Also - on your other thread - I would inspect the cable on the E brake and lube it well.:)
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,294
4,853
113
Sandpoint, ID
Unless I'm missing something it's pretty strait forward on that model: :confused:

You just loosen the alternator and remove the belt carefully guiding it over the fan, then do the reverse to install.

I would also recommend you getting the WSM (Work Shop Manual, AKA Service Manual), full of a ton of information. ;)
 

Kubotasidewalkdude

New member

Equipment
L3940 HST
Dec 6, 2016
43
0
0
Canada
It's not that easy. Although from what I'm reading it isn't to hard either. It's gotta be fished in some how after loosening a few bolts


Sent from my iPhone using Tapatalk