B7100 with a slight mechanical issue.

Grumpy560 · May 10, 2015

ShaunRH said:
Are you going to leave the cylinders black or take them orange?

I'd also recommend, while you're at all this, fabricating a built on bucket safety bar so you can raise the bucket, engage the safety and it can't possibly lower. Not that you'll have to dig into the engine anytime soon, but they are nice to have when you are working on the motor or anything up front!

Ah yeah, the cylinders, hydraulic lines and mounting pins are going to be black. The loader control valve, bucket and shields will be orange since the shields have already been painted.

Apogee · May 21, 2015

Hey Steve,

Just a quick check-in. You doing alright? Got pretty quiet. You taking a break or still moving forward?

Patiently waiting to see progress pics...

Hang in there!

Steve

Grumpy560 · May 21, 2015

Apogee said:
Hey Steve,

Just a quick check-in. You doing alright? Got pretty quiet. You taking a break or still moving forward?

Patiently waiting to see progress pics...

Hang in there!

Steve

Patience buddy, still waiting for my parts to get here.

North Idaho Wolfman · May 21, 2015

Grumpy560 said:
Patience buddy, still waiting for my parts to get here.

Hurry it up!

Some of us are getting impatient to see it done!

en_teng · May 22, 2015

North Idaho Wolfman said:
Hurry it up!
Some of us are getting impatient to see it done!

give mr grumpy enough time

clippy · May 22, 2015

It's amazing how so many people can get invested in the rebuild of someone else's tractor.

I, for one, am mighty impressed. Keep up the good work. Just hurry it up. ;-)

ShaunRH · May 22, 2015

It's like really slow motion Reality TV... REALLLY SLOOOOW MOOOTION...

Grumpy560 · May 23, 2015

Alright, I ordered new hydraulic hoses and some fittings. They sent me 3/8 hoses instead of the 1/4 inch lines I wanted. Sent the parts back and waited for the correct replacements to get here.

I received those lines today and now I have the correct parts. I've got everything set out and ready to go.

While I was waiting for parts I spent some time cleaning up the hydraulic cylinders. Only 2 are complete and mounted on the loader frame.

I also spent some time putting decals on the hood, fender and one side panel. I ordered the chrome Kubota emblem that mounts on the grille, $44 bucks ouch. The emblem that goes between the head lights was $66 and some change.

Apogee · May 23, 2015

Figured you were spending time polishing that alternator.

I was going to say you were likely busy polishing your knob, but I thought the alternator sounded better...

Grumpy560 · May 27, 2015

Well, I had to get a new phone last week and unlike my old one this phone will not let me post pics from the gallery like I did before. Bummer as I've been trying to upload pics to my last post without success. I've tried changing every setting there is on this phone too.

I've just about given up on it and will probably just take a video when I'm all done and try to post it on YouTube instead.

Apogee · May 27, 2015

Dangit!

You should have bought an iPhone 6! You know, one of those phones that just work without any hassles...

NOW how are we supposed to get our fix?

sigh...

ShaunBlake · May 28, 2015

Grumpy560 said:
Well, I had to get a new phone last week and unlike my old one this phone will not let me post pics from the gallery like I did before...

Ahhh, Technology! Ain' it wunnerful!

Mikeske · May 28, 2015

Ahh the iPhone is not everything. My pictures end up being turned to landscape on this site

ShaunBlake · May 28, 2015

Mikeske said:
Ahh the iPhone is not everything...

I couldn't agree more.

Mikeske said:
... My pictures end up being turned to landscape on this site

Now that actually isn't the iPhone's iPhault; the configuration of the vBulletin BBS system causes that. You need to remember to always turn your (iPhone/AndyPhone/WinPhone) sideways, or to crop the image so it's square or wider than tall. (Or a sneaky person might post them on MTF and link to them.)

Apogee · May 29, 2015

Mikeske said:
Ahh the iPhone is not everything. My pictures end up being turned to landscape on this site

Maybe if you held your phone in Landscape mode while uploading they'd come out right...

(Now THAT is funny - I posted in jest just to make folks smile. I then saw Shawn's post above about rotating the phone. Who'd ever have thunk it?)

coachgeo · May 29, 2015

once you download to your computer... open them. You will find most are not oriented right anyway Same for tablets. Nothing new and it won't change. It is a conflict with the way Tablets and phones have auto orienting software.

Best bet is to before you even write your post. Download pics you plan to use to your computer, Use a photo editor to turn them to the correct orientation then resave. Then write up your post and attach images.

Grumpy560 · May 29, 2015

Alright, here we go again. I've posted pics to my last reply on page 29 and I'll pick up where I left off there.

So this week I've managed to finish up the last 2 hydraulic cylinders and the loader control valve assembly. I'll have my dad paint the valve assembly this weekend.

I've also been working on cleaning up the steel lines that fasten to the loader frame, they are turning out better than I thought they would.

I'll catch up on posting pics as I go.

Apogee · May 29, 2015

Ahhhhh, FINALLY some good porn!

Grumpy560 · May 29, 2015

Here's a few more, too bad I can only attach 5 pics at a time.

Grumpy560 · May 29, 2015

And the last batch of pics I'm going to post up until I get more done after the weekend.

B7100 with a slight mechanical issue.

Member

Member

Member

Moderator

Member

New member

New member

Member

Attachments

Member

Member

Member

New member

New member

New member

Member

Well-known member

Member

Attachments

Member

Member

Attachments

Member

Attachments