D donsshop New member Equipment m9000 Aug 19, 2014 1 0 0 joppa, al USA Aug 19, 2014 #1 I have a M9000 that the PTO sometimes won't in gage. I have changed hydraulic filters, no help. Could there be trash in control valve ? Any suggestions welcomed. Don
I have a M9000 that the PTO sometimes won't in gage. I have changed hydraulic filters, no help. Could there be trash in control valve ? Any suggestions welcomed. Don
North Idaho Wolfman Moderator Staff member Lifetime Member Equipment L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more Jun 9, 2013 28,605 5,066 113 Sandpoint, ID Aug 19, 2014 #2 I would bet more on a bad cable or out of adjustment! Inspect both ends and while moving the lever and watch to see if the movement is free and fluid.
I would bet more on a bad cable or out of adjustment! Inspect both ends and while moving the lever and watch to see if the movement is free and fluid.
Bulldog Well-known member Equipment M 9000 DTC, L 3000 DT Mar 30, 2010 5,440 73 48 Rocky Face, Georgia Aug 20, 2014 #3 Changing the filter didn't hurt anything but I agree with Wolfman. Eliminate all the simple things first.
Changing the filter didn't hurt anything but I agree with Wolfman. Eliminate all the simple things first.