Wonder if anyone can tell me how to switch from metric readings to standard on the Intellipanel of a L4060, (2016). I have run down the menu in each screen but don't see anywhere it can be done. Thanks
L4060 Intellipanel
- Thread starter rjr8806
- Start date
There's a separate display that shows metric and one for standard.
Display 1; Shows Hour Meter
Display 2; Trip Meter
Display 3; Speed MPH
Display 4; Speed KM/H
Display 5 ; PTO Mode
See page 50 of your owners manual.
Display 1; Shows Hour Meter
Display 2; Trip Meter
Display 3; Speed MPH
Display 4; Speed KM/H
Display 5 ; PTO Mode
See page 50 of your owners manual.
http://www.orangetractortalks.com/forums/showthread.php?t=25792
This thread has the steps to make the change. The trick to seeing the right display is holding the key in the on position at the same time you hold down the display button.
This thread has the steps to make the change. The trick to seeing the right display is holding the key in the on position at the same time you hold down the display button.
Technical Ted
Member
Equipment
L3560/cab LA805 loader LandPride RCF2060 rotary cutter, HLA hyd angle snow blade