Server outage

Tooljunkie

Tooljunkie

Well-known member
Lifetime Member

Equipment
L1501,home built carry all, mini plow blade.
May 13, 2014
4,150
27
48
59
Lac Du Bonnet, Manitoba,Canada
I just thought the internet was broken....so i went back to working. Musta fixed itself, because its working now.

On a good note, i havent seen an outage for quite some time. So,thats a good thing.
Absence makes the heart grow fonder.....
 
olthumpa

olthumpa

Active member
Lifetime Member

Equipment
L275
May 25, 2011
1,501
2
38
Maine
Tooljunkie said:
I just thought the internet was broken....so i went back to working. Musta fixed itself, because its working now.

On a good note, i havent seen an outage for quite some time. So,thats a good thing.
Absence makes the heart grow fonder.....
Click to expand...
Ayah, X2 :)
 
Lil Foot

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,281
2,233
113
Peoria, AZ
In addition to the above mentioned outages, I have been experiencing another odd problem intermittently. Occasionally, I click on a thread, it appears to load normally, but the page will not scroll, no matter how long I wait. I reload the page, and it almost always scrolls- sometimes it takes two reloads, then everything works as it should. It only happens on this forum. Odd.
 
lreops

lreops

Member
Lifetime Member

Equipment
L3400DT W/ LA463 FEL and L235DT W/ BF400 Loader
Dec 26, 2011
306
0
16
Rising Sun, Maryland
Lil Foot said:
In addition to the above mentioned outages, I have been experiencing another odd problem intermittently. Occasionally, I click on a thread, it appears to load normally, but the page will not scroll, no matter how long I wait. I reload the page, and it almost always scrolls- sometimes it takes two reloads, then everything works as it should. It only happens on this forum. Odd.
Click to expand...
I've also have had that happen, didn't know if it was the forum or my older PC.

Ron

 
clay45

clay45

New member

Equipment
L2050DT, TSC 5ft Rake, Tartar 5ft rototiller, TSC Middlebuster, TSC CarryAll
Feb 6, 2015
279
1
0
SC
I often look at the New Posts only to discover I cannot go beyond the first page. Is that a sort of database inquiry limit?
 
S

ShaunBlake

New member
Lifetime Member

Equipment
B6100D; B219; Piranha bar; Hodge stabilizers; Filled Ag rears; R322T w/48" deck
Dec 21, 2014
899
1
0
81
Sugar Hill -- next door to Buford, GA
clay45 said:
I often look at the New Posts only to discover I cannot go beyond the first page. Is that a sort of database inquiry limit?
Click to expand...
No, Clay -- it's because there has been a new post since you loaded that page and the system looses track of where you are. I usually load the next 2 or 3 pages in separate windows to prevent that.
 
BAP

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,526
664
113
New Hampshire
lreops said:
I've also have had that happen, didn't know if it was the forum or my older PC.

Ron
Click to expand...
Same problem here on both my Mac and PC
 
BAP

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,526
664
113
New Hampshire
2 times yesterday and 1 time today so far
 
You must log in or register to reply here.

Top Bottom