L3800HST PTO cable adjustment

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,306
4,857
113
Sandpoint, ID
The WSM has the procedure in it, I don't have a copy of that one so I can tell you.
There isn't a cheap or free version available, you'll have to get it from a dealer.
 

Jim L.

Active member
Jun 18, 2014
811
86
28
Texas
Howdy

Linkage diagram on page 3-M2 of WSM; adjust procedure on page 3-S16.

Back by the PTO handle, center the cable on the metal bracket using the two nuts.

Place the PTO handle in the OFF position.

Other end of PTO cable, at case. Back off the nut closest to the cable. Then turn the same nut the opposite way to tighten until just before the case lever starts to move.

Then tighten the nut on the other side of the case bracket and should be good to go.

De nada.