I have a B6100 that i got a good deal on, but it needed some tlc and works great now. The only problem is it leaks fuel where the 3 ports come out of the injector pump, and a little where the injectors go into the cylinders.
I am not too concered about the small fuel leaking around the injectors(its a 30yr old tractor) but the fuel leaking around the ports from the pump is enough to create a small puddle on the garage floor. (which im getting sick of cleaning up)
There is no lack in performance or anything else, but i was wondering if this leak could cause any unseen damage, and how do i fix this problem(there must be gaskets that need to be replaced right?) And lastly if i was to take it apart how hard is it to crack the lines to the cylinders to bleed out any air that would enter the system.
Any help on the matter would be much appreciated.
I am not too concered about the small fuel leaking around the injectors(its a 30yr old tractor) but the fuel leaking around the ports from the pump is enough to create a small puddle on the garage floor. (which im getting sick of cleaning up)
There is no lack in performance or anything else, but i was wondering if this leak could cause any unseen damage, and how do i fix this problem(there must be gaskets that need to be replaced right?) And lastly if i was to take it apart how hard is it to crack the lines to the cylinders to bleed out any air that would enter the system.
Any help on the matter would be much appreciated.