Hydraulic hoses

BarryB · Feb 19, 2018

My name is Barry, I have a L2600 with a front end loader. I need to know where the 3 hoses that go from the loader joy stick box back to the side of the transmission. It’s a 9210 control box. Or maybe some one can tell me where I can get a diagram on the hydraulic lines. Thanks

100 td · Feb 19, 2018

Do you have an operators manual? They generally have the points marked in the manual. What model loader do you have?
I can't see an ops manual on the net with a quick search, if you don't have one, send North Idaho Wolfman a message and see if he has one squirreled away.

North Idaho Wolfman · Feb 19, 2018

This should be what you need to know:

If you need more info just ask.

100 td · Feb 20, 2018

Not sure if it's because of your single post status Barry or something else, but I can't reply to your private message as it says you have exceeded your message limit?

BarryB · Feb 22, 2018

I got half of my problem fixed. Any advice on why my loader will go up & down but won***8217;t dump or turn up?

rentthis · Feb 22, 2018

Be sure your quick disconnects are properly connected. They will fool you sometimes.

North Idaho Wolfman · Feb 22, 2018

Does it have Quick disconnect on the hoses to the loader cylinders?
Could be one is not seated completely or is bad.

Swap both sets of hoses from lift to roll:
If three issue moves from roll not working to lift not working it's a valve or valve side disconnect issue.
If the issue stays with the roll then it's a line side disconnect or cylinder issue.

Search

Hydraulic hoses

BarryB

New member

100 td

Active member

North Idaho Wolfman

Moderator

Attachments