HST pedal adjustment

C

CJN8

New member

Equipment
B2650HSD, LA534 FEL, Gearmore Box Blade, Bush Hog, Cimmeron Rake
Nov 16, 2013
122
0
0
San Diego, CA
What are the symptoms of a HST pedal that is out of adjustment? Is it just "over run" when the tractor should be returning to neutral?
 
North Idaho Wolfman

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,676
5,105
113
Sandpoint, ID
One way it can be out adjustment it will crawl / creep forward or in reverse when the pedal is in neutral.
Another way it will have a lot more forward to reverse or reverse to forward movement.

What kind of issue are you having?
 
skeets

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,155
2,814
113
SW Pa
If it is creeping you might want to get under and clean all the gunk from the linkage and there is a grease fitting there Im thinking and a shot of grease wouldn't hurt either,,, look for the simple stuff first
 
C

cb750k8

Member

Equipment
B7200HST D 4X4
Aug 23, 2013
101
2
18
Dublin, Ireland
There is an adjustment screw which is intended to stop creep. Instructions are in the manual. If you want I will look it up and post.

Under the seat of the B7200. you need to remove 2 m8 bolts, remove a rectangular plate and there is a sloted screw which is for adjustment.
cheers
 
C

CJN8

New member

Equipment
B2650HSD, LA534 FEL, Gearmore Box Blade, Bush Hog, Cimmeron Rake
Nov 16, 2013
122
0
0
San Diego, CA
I was able to download the manual. What I am having issue with is more power/ top end in reverse than in forward. I am going to work on it a bit tomorrow.
 
Last edited:
You must log in or register to reply here.

Top Bottom