I bought a used m108s and it has some small 19.5x24 r4 tires on 24xw16l rims. I am looking to increase to the largest size, which I think is a 18.4x34. Can I mount these on my existing rims? I am doing this for clearance and traction improvement.
Tire replacement question
- Thread starter Edringtonfarms
- Start date
Assuming it's 4wd, are you planning on changing all 4 tires?
A little confused because you listed both front an rear tire sizes.
A little confused because you listed both front an rear tire sizes.
I will be replacing both sets. I currently have:
Front :14-17.5 R4 on Amr8993 bw12
Rear: 19.5L-24 R4 on amr8533 24xw16l
I want to go to:
Front: 13.6-24. Rear: 18.4-34 (4WD)
And want to know if the rims will work with new tires. I added a picture of what it looks like now.
Front :14-17.5 R4 on Amr8993 bw12
Rear: 19.5L-24 R4 on amr8533 24xw16l
I want to go to:
Front: 13.6-24. Rear: 18.4-34 (4WD)
And want to know if the rims will work with new tires. I added a picture of what it looks like now.
Attachments
You will have to change rims also. On the front your wanting to go from a 17.5" diameter rim to a 24", and on the rear, you are changing from a 24" rim to a 34".
Thank you. That's a little disappointing the quote for new tires and rims was $4,200. Guess I have something to save up for.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
No, as stated, you have 17.5" rims on the front and you have 24" on the rear, and you want to go 24" on front and 34" on rear.
So buy them as a set in a rim and tire combination.
