I’ve got a B7200H tractor & have found a RC60-72 mower deck for sale locally. I was wondering if there was a way to get this deck to work with a hydraulic tractor?
Will a RC60-72 mower work on a B7200H?
- Thread starter Medic13
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Not without a bunch of parts, a lot of money, and a lot of time to kill.
The gearbox, and deck are different between those 2 models.
I’ve got a 72H deck but it needs new pulleys, belt & 1 spindle with blade. Would I be able to harvest these parts off the 72? Or am I better off getting new replacement parts? I can get a 72 for $500cdn which is what I would pay for just pulleys & a belt.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Well this is a little complicated.
The outside 2 spindles are the same, middle is not.
The pulley's will be the same if the deck is serial #<=21520 , otherwise they might not work.
The outside 2 spindles are the same, middle is not.
The pulley's will be the same if the deck is serial #<=21520 , otherwise they might not work.
Huh...sounds like too much trouble to find out what may or may not work.
Thanks for the fast help ***128077;***127995;***128074;***127995;
Thanks for the fast help ***128077;***127995;***128074;***127995;