I have an OLD B9200HST, 4WD, Hydrostat.
I have changed the hydraulic oil filter and the oil (with Kubota oil and filter $$$$).
When using the 3point lift, the drive will not work, it makes a straining noise. I have to reverse direction on the hydrostat and then go back to the original direction.
I am betting that there is still water in the oil (when I drained it this first time I changed it, a tremendous amount of water came out first).
This is an old monster but still a very good machine! I just don't know allot about hydraulics!
There is no way to take this to a repair facility, so I need to learn how to fix and maintain this. I am looking for advise and training.
My thanks in advance!
Jon
I have changed the hydraulic oil filter and the oil (with Kubota oil and filter $$$$).
When using the 3point lift, the drive will not work, it makes a straining noise. I have to reverse direction on the hydrostat and then go back to the original direction.
I am betting that there is still water in the oil (when I drained it this first time I changed it, a tremendous amount of water came out first).
This is an old monster but still a very good machine! I just don't know allot about hydraulics!
There is no way to take this to a repair facility, so I need to learn how to fix and maintain this. I am looking for advise and training.
My thanks in advance!
Jon