shootem604
Member
Lifetime Member
Equipment
L245DT with Kubota (Arps Model 22) FEL and Kubota B/L4520B (Woods 650) BH
Here's some of the stuff I've cobbled together over the last year.
My first project and my first time welding, a carryall/3pt pallet forks (The carryall "box" is a pallet with sides. You may notice it is a little out of square. It has since broken once, and I fixed it and it has been good since.
The second was a scraper made with a skidder tire I cut in half with my sawzall and bolted to a frame I welded up, here on the L225 in the snow. Works good for leveling dirt too, but now I have a back blade.
The mancage was pretty easy - cut a section out of a tote cage and install safety chains.
This step was a nice addition to the bottom of the loader towers - has made getting on and off the tractor much easier.
My first project and my first time welding, a carryall/3pt pallet forks (The carryall "box" is a pallet with sides. You may notice it is a little out of square. It has since broken once, and I fixed it and it has been good since.
The second was a scraper made with a skidder tire I cut in half with my sawzall and bolted to a frame I welded up, here on the L225 in the snow. Works good for leveling dirt too, but now I have a back blade.
The mancage was pretty easy - cut a section out of a tote cage and install safety chains.
This step was a nice addition to the bottom of the loader towers - has made getting on and off the tractor much easier.
Attachments
-
70 KB Views: 448
-
75.4 KB Views: 919
-
91.2 KB Views: 466
-
94.4 KB Views: 545