Pallet Forks
- Thread starter bruceaub
- Start date
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
I recently got a set of these...
https://www.palletforks.com/tractor...-42-pallet-fork-trailer-hitch-attachment.html
Plenty of capacity for what these small tractors are capable of lifting (in fact, they are overkill). I wanted the 2" receiver in the front for moving trailers as well. I believe I got them at a better price, fast/free shipping. Only downside that I have seen thus far is:
1) the welds on the frame look like they were done by a child (and perhaps, they were)
2) my neighbor keeps borrowing them, so they aren't in my possession when I need them
https://www.palletforks.com/tractor...-42-pallet-fork-trailer-hitch-attachment.html
Plenty of capacity for what these small tractors are capable of lifting (in fact, they are overkill). I wanted the 2" receiver in the front for moving trailers as well. I believe I got them at a better price, fast/free shipping. Only downside that I have seen thus far is:
1) the welds on the frame look like they were done by a child (and perhaps, they were)
2) my neighbor keeps borrowing them, so they aren't in my possession when I need them
Jchonline
Well-known member
Lifetime Member
Equipment
Kubota L6060, KX040-4, M7060, RTV X1100C, M62 (sold)
Capacity just over your breakout, 48 inch length, adjustable width if possible. I have the landpride version, they work great.
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
If clamp on is something you are looking for :
Got these for a friends B2601
https://www.amazon.com/Pallet-Adjus...&s=gateway&sprefix=titan+forks,aps,147&sr=8-4
heavy as hell - he was impressed....and at $162 shipped....hard to beat!
Fro65
Member
Lifetime Member
Equipment
L3301HST, LA525, BH77, LP tiller, LP grader box, LP blade, BX2380
I have a L3301 also. Four years ago, I bought the Titan 36 inch version with the crash guard and bale spear socket.
It has been bulletproof. On mine, the welds are very good...I had heard they could be hit or miss. Didn't matter to me because the price was good and I can weld.
It has been bulletproof. On mine, the welds are very good...I had heard they could be hit or miss. Didn't matter to me because the price was good and I can weld.
Poohbear
Active member
Equipment
L3301 HST, LA525, LP shredder, BB1566 box blade, QH10, Worksaver pallet fork
I use a Worksaver brand . It's adjustable and no issues with hooking to my QA on my L3301. Quality is top notch.
I've been happy with the Titans. These are the 42" forks. I just can't spend $8/900 on Artillian or Deere brand. I mean, they're pallet forks.
I only wish I had got the set with a 2" receiver built in. Hindsight is always 20/20.
I only wish I had got the set with a 2" receiver built in. Hindsight is always 20/20.
Attachments
Last edited:
I had a set of forks from Land Pride for a L3901 I used to have they seemed like a nice match they were rated for just over ton and only weighed a few hundred pounds.
shootem604
Member
Lifetime Member
Equipment
L245DT with Kubota (Arps Model 22) FEL and Kubota B/L4520B (Woods 650) BH
I have the Titan clamp on forks. I had some welds break, so I reinforced the angles by welding on some angle iron, and no trouble since. Very useful if you don't need them very often, or for very much weight.
Do you have any idea what the total weight is? This is the set I have been looking at.
shootem604
Member
Lifetime Member
Equipment
L245DT with Kubota (Arps Model 22) FEL and Kubota B/L4520B (Woods 650) BH
Yep I saw that. I called them today and I was number 45 in line
. I set a call back but haven’t got a call yet.Titan are usually 260lbs and up. Their frames seem to be light, but the forks are very heavy for sub-compacts. For the BX23S and JD 1025r that is a little heavy and better options out there. Probably wouldn't notice on something else heavier though. Artillian prices are crazy and over $1100.
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
I would concur with the post above that the frame is somewhere around 100 lbs. The 42" forks are quite heavy (say around 60-70 lbs/fork?). My suggestion for your machine would be to get a shorter fork or perhaps at least some that aren't quite as heavy.
The only drawback to the 42" that I have is that they are rather difficult to see. I find myself standing up to see the tips when they are lowered to the ground. I plan on hitting the tips with some bright orange paint.
It sounds a little heavy for my BX. My Ford 1720 would do ok with it but I want one set I can use on both.