B7200HST Will not start

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
I don't see the rack pin in the slot???
Did you pull the injection pump up or out at anytime?

Try and move the rack linkage, it should move freely, I'm betting it doesn't.

The rack pin not being in the slot would completely explain why it's not responding the way it should.

 

Attachments

Tim Kosmacek

New member

Equipment
B7200HST
Feb 19, 2019
22
0
0
Persia, IA USA
I don't see the rack pin in the slot???
Did you pull the injection pump up or out at anytime?

Try and move the rack linkage, it should move freely, I'm betting it doesn't.

The rack pin not being in the slot would completely explain why it's not responding the way it should.

I did not remove the pump at all. There in a pin clear at the top of the linkage slot. It does not move freely I carry gently wit a screwdriver and it will move but it is tight.
 

Tim Kosmacek

New member

Equipment
B7200HST
Feb 19, 2019
22
0
0
Persia, IA USA
I don't see the rack pin in the slot???
Did you pull the injection pump up or out at anytime?

Try and move the rack linkage, it should move freely, I'm betting it doesn't.

The rack pin not being in the slot would completely explain why it's not responding the way it should.

I did not remove the pump at all. There in a pin clear at the top of the linkage slot. It does not move freely I carry gently wit a screwdriver and it will move but it is tight.
 

Attachments

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,286
4,853
113
Sandpoint, ID
Pump is gummed up or damaged.

Pull the pump.

If you don't want to rebuild it yourself (which is not easy, but not impossible), send me a PM and I'll give you some other options. ;)