Kubota B7100 with 3 way push plow

So I am looking for some replacement parts for my controls for my push plow. I want to see if I can get a control that has a float option so I can push snow with it as my driveway is not flat. I don't want to lost the ability to lock the blade in a down position (and lift front of tractor up).

I am not familiar with hydraulics at all so not sure if this is possible, or if its one way or the other.

If not, just need to find a part number for replacement controls/valves.

Thanks. I can get pictures of my current setup if needed, or any other information that would help.

Jay

Standing on the corner said:

Recommend a loader valve for B6100 plow?
https://r.tapatalk.com/shareLink?sh...om/forums/showthread.php?t=39668&share_type=t


Sent from my iPhone using Tapatalk

Click to expand...

So with the loader valve, I can have it go into float, or have it push down? I just don't want to lose the ability to have the blade dig down into the ground.

If so, do you have a p/n on the loader valve you used.

Thanks for the help.