rkidd
Active member
Lifetime Member
Equipment
B2650, FEL With QA 60"mmm, 3pt FDR1672,homemade ballast box, BB 1572 box scraper
I bought a 48" King Kutter brush hog from my neighbor last fall for almost nothing, and this was my winter time project. Finally getting it done and posting it. It was pretty beat up and the back panel was almost hitting the blades. I hooked it up and ran it last fall to make sure the gear box was good, and it was quiet and no leaks with a slight sign of moisture in the gear box, also had an almost new pto shaft, so with that I decided to fix it up during the winter as I have time and wanted a brush hog for around my property. It was in pretty rough shape and needed the back panel cut out and a new one welded in which is something I have never done, but decided to tackle it and learn.
Last edited: