Oil light comes on intermittently so want to check oil pressure with a gauge but cannot find the sensor. The sensor rear left on the head has a yellow/red wire which the electrical diagram says is the Coolant temp switch. The oil sensor switch according to the schematic has a blue wire. Can anyone point me to the oil switch location. Oh, I have a shop manual but it is useless in this regard.
M4500 Oil Pressure Sensor location
- Thread starter mcnzder
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
perfect thanks so much
Is the picture you show on line somewhere with other pictures or is there somewhere I can purchase another detailed manual. As I mentioned the shop manual I got with the tractor is not very good.
Is the picture you show on line somewhere with other pictures or is there somewhere I can purchase another detailed manual. As I mentioned the shop manual I got with the tractor is not very good.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
For pictures like this go straight to the source.
http://www.kubota.com/part/partsList.aspx
http://www.kubota.com/part/partsList.aspx
Last edited:
Thanks again stopped buy a Kubota dealer today to pick up filters and they showed me this link which I'd tried but would not open. I tried and tried but nothing. after a bit of figuring I found that it's java driving the parts list. Well I'm using firefox which is currently blocking java due to security issues. I tried using Explorer and bingo it works I can look up the parts.